• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Trialtech Race ISIS with Bolts

Product code: 11046


In stock

Trialtech Race ISIS with Bolts

- Good value ISIS Bottom Bracket from Trialtech.
- Fits both 68mm (use spacer provided) and 73mm shell widths.
- Tough M12 steel axle for maximum durability.
- Anodised aluminium alloy cups keep the weight down.
- Three replaceable sealed cartridge bearings keep your cranks running smooth during all weather conditions.
- Clears all models of freewheels, but may not fit with some setups using a bashring - please ask us if you are unsure.
- Includes cranks bolts.
- Available in 128mm axle length only.
- Weight: 361g plus bolts at approx 35g per pair.


Brett Stollery

Hi Tarty, I was wondering if this bb will be suitable for a front freewheel with a trialtech half alloy bashguard? Thanks, Brett

Posted by Brett Stollery on 12/12/2010

Reply from TartyBikes on 13/12/2010

Hi Brett - Depending on your freewheel, it should be fine. If you have an ENO or a similar 'tabs out' style of extractor tab then it might be pretty close, but for most modern day freewheels with recessed extractor tabs it should be fine. Thanks, Mark


Will this fit a tensile front freewheel and an echo urban bash ring on a zoo python 07 frame?

Posted by Henry on 23/12/2010

Reply from TartyBikes on 23/12/2010

Hi - To fully mae sure that they'd fit it'd be good to know the type of cranks you're using, but generally speaking most cranks out there, with the Tensile FW and Urban bashring, should fit fine. The Race BB uses a 128mm spindle which is the most popular length in trials because of it's compatibility with almost all setups. Thanks, Mark


Will it fit on my Because Simple Street 2010 frame witch have 68 mm wide?

Posted by Petras on 19/09/2012

Reply from TartyBikes on 20/09/2012

Hi Petras - It should fit absolutely fine. You will need to use the thin spacer supplied with the BB to get it to fit your BB shell correctly. Thanks, Mark


Will this bottom bracket fit my Inspired Element,since i am using a bashring ?

Posted by Sam on 27/04/2014

Reply from TartyBikes on 28/04/2014

Hi Sam - thanks for your question. This bottom bracket will fit your frame just fine, and it has the longest axle available so clearance will be no issue. Thanks, Flipp.


will this bottom bracket work for a giant stp frame (73mm), along with try-all isis cranks, ffw and bashring? I know most folks are using frames with 68mm bb spacing, so not sure if this will work with 73mm. Any ideas?

Posted by kirk on 14/03/2015

Reply from TartyBikes on 16/03/2015

Hi Kirk - thanks for your question. This bottom bracket will work perfectly with a 73mm shell. Simply don't fit the extra washer that is supplied (this is for use with 68mm shells). Thanks, Flipp.


Hi I was just wondering if you know what bottom bracket will fit a ko bikes km1 and if you sell them ?

Posted by Rory on 21/06/2015

Reply from TartyBikes on 22/06/2015

Hi Rory - thanks for your question. Any threaded bottom bracket we stock will fit, and the longer the axle used the less clearance issues you will have. A 128mm option such as this would be perfect. Hope that helps. Thanks, Flipp.


Hi would this BB fit my onza comp 2010

Posted by Danny on 24/03/2016

Reply from TartyBikes on 24/03/2016

Hi Danny - This BB should fit your Onza Comp nicely. Thanks, Mark

brogan bursill

hi, would this work on a 1010 jitsie frame with echo tr cranks?

Posted by brogan bursill on 18/11/2017

Reply from TartyBikes on 20/11/2017

Hi Brogan - This should work fine with that setup as long as you have the TR cranks that use a screw-on freewheel rather than a splined one. Thanks, Mark


Would this fit a 2004/05 t-mag what is running a tensile freewheel and tensile crank arms n matching bash ring

Posted by Josh on 29/07/2018

Reply from TartyBikes on 30/07/2018

Hi Josh - This should work fine with that setup. Thanks, Mark


Hi will this fit a onza limey 320 2012 thanks gazz

Posted by Garreth on 06/08/2018

Reply from TartyBikes on 06/08/2018

Hi Gazz - This BB will fit into your Limey frame fine, but to make sure the axle is the correct length it would be best to measure your existing BB axle. With some setups you're better off with a 122 or 122.5mm axle length, but for others the 128mm (like this BB) would be ideal. If you can check your existing BB then that should let you know whether this will work for you. Thanks, Mark

Oscar Jörgensen

Would this fit a ozonys v8 frame (20") with a comas freewheel (108 point one) and a jitsie bashring

Posted by Oscar Jörgensen on 26/09/2018

Reply from TartyBikes on 27/09/2018

Hi Oscar!
As long as you have a pair of ISIS Cranks you're planning on using with them then this BB should work fine with that frame and parts kit.

chris tabb

hi guys. will this fit my 2002 Koxx Frame? Cheers chris

Posted by chris tabb on 05/03/2012

Reply from TartyBikes on 05/03/2012

Hi Chris - I can't see any reason why not! Thanks, Mark

Henry Wingfield

Cheers, it would be the Tensile freewheel, Echo Urban bash and Echo 7075 CNC cranks

Posted by Henry Wingfield on 24/12/2010

Reply from TartyBikes on 26/12/2010

Hi Henry - In that case, I'd imagine it would work fine. Thanks, Mark

adam sadowski

is that BB be fit to my 20" onza pro 2012 or 2011

Posted by adam sadowski on 18/03/2014

Reply from TartyBikes on 18/03/2014

Hi Adam - thanks for your question. This bottom bracket will fit your frame just fine, the only problem could be your cranks. The cranks on that bike have been made in both square taper and ISIS models, so you would need to find out which you have. If the hole in the crank that the bottom bracket fits in to is a square, this will not work. If it is a circle with ten splines machined in to it, this bottom bracket will fit perfectly. I hope that helps. Thanks, Flipp.


Will this fit my 2009 Onza Blade? I'm running a Tensile FF Freewheel, Echo 160mm ISIS cranks and a 74 Kingz bashring. Many Thanks

Posted by Will on 24/04/2015

Reply from TartyBikes on 24/04/2015

Hi Will - thanks for your question. Yes, this will fit your bike just fine. Thanks, Flipp.


Write a review

Not yet rated

People who bought this also bought…

TartyBikes V3 T-Shirt

Product code: 13072




1 colour available


1 colour available

Check Stock

Check Stock

KMC Z510 HX, 1/8", Silver

Product code: 11538





In stock In stock

Add to basket

In stock

In stock

TMS Street Riser 750 V2

Product code: 13515



  • Super high rise street bar!


On order On order

Stock reminder

On order

On order

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough