• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

TNN Engineering BTM Refills

Product code: 14305

$19.25

In stock

TNN Engineering BTM Refills

TartyBikes Multibuy, buy two and get 10% off one! Add your discounted product at the basket page.

  • Recommended for: Sharp light grind, dry weather, slightly deeper grind for wet weather.
After months of painstaking research, testing and manufacturing development, our own unique compound is finally ready.

- A new refill for TNN Engineering CNC Magura and v-brake backings!
- New pad material extensively tested by Tarty Bikes team riders Adam Morewood, Daisy Craig, Ben Tyrrell and UK rider Luke Walder.
- Moulded and hand finished right here in the UK!
- The BTM yellow (Ben Tyrrell Yellow) is a softer compound than current TNN LGM and ADM refills. Ideally suited to a light sharp grind, these pads work great for front brakes, and on the rear too for riders wanting a more progressive lever feel.
- They also work great on smooth rims!
- Designed to fit backings with recess dimension of 18mm x 8mm x 4mm.
- 8mm pad depth. Each pad is hand finished by us in house, there may be a small differences in pad depth for each batch, but no more than 0.5mm.
- Sold as a pair of refills.
- Weight: 11g (pair)

Additional Information

Please note: The softer compound gives great bite and hold, but will wear faster than harder materials. We recommend a fresh rim grind before fitting new pads on already ground rims.

Instructions on how to replace TNN pad inserts can be found here.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

40%

Based on 2 customer ratings

Chakers1998

Great, but with tar.

Posted by Chakers1998

Having used every TNN pad except for the new orange ones, these rank below the LGM, ADM, and the blue pads, without any aid from tar or rosin and on a fresh medium grind with Trialtech rims. They've got really nice bite and make a great loud noise, but they don't have as much hold as the other pads from what I've experienced. Tar makes the hold much, much better, as well as providing additional bite and puts them right up there with the other pads. I would stick to the recommended Tarty guidance of using these as a front pad, especially for those who want a pad that isn't quite on or off. I did use these on a unicycle with smooth rims for a very brief time before putting them on the bike, and they worked beautifully on the machined brake track even without tar, so they should be an amazing smooth rim pad.

Reply from TartyBikes

Thanks for the honest review, Michael! We've found the BTM pads to be a great option for smooth rims. As a softer pad, they don't always perform their best on ground rims, but we've had good results using tar as you've mentioned, and with certain brands of rim like Hashtagg and Clean.

kieran

Would avoid on ground rim

Posted by kieran

Used with a fresh grind and absolutely no hold at all, makes front wheel moves very difficult and static hooks near impossible. Maybe this compound is better with smooth rim, would not recommend with a grind.

Reply from TartyBikes

Hi Kieran
We're sorry you found the pads were lacking bite, that wasn't our experience during testing or in continued use by Adam Morewood, Ben or Daisy Craig, and from customers who have bought them. The type of grind is critical for getting the best out of these pads, a sharp, lite grind with a stone cutting disc will give the best performance. If advice is needed on best set up, we're always happy to help!
Ben

People who bought this also bought…

TartyBikes 20 Years of Trials T-Shirt

Product code: 14344

£15.99

£15.99

RRP: £20.00

Save 20%

£15.99

RRP: £20.00

Save 20%

In stock In stock

View options

In stock

In stock

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008

£0.50

100%

Stickers

3 colours available

£0.50

3 colours available

  • Now available in shiny Chrome Red finish!

£0.50

In stock In stock

View options

In stock

In stock

TartyBikes V4 Chainstay Protector

Product code: 12485

£4.50

100%

Chainstay Protectors

4 colours available

£4.50

4 colours available

  • New sizing, available in 4 colours!
  • Wide range of compatibility, from the steel Inspired Arcade up to the widest alloy trials frames!
  • Double stitched velcro ensures maximum life!

£4.50

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy