• Opening Hours.
    Fri: 9.00am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Echo SL Rim Brake

Product code: 12636

From £58.33 to £90.83RRP: £90.83(Save up to 36%)

Check Stock

Echo SL Rim Brake

Front (Grey lever body)
Front (Red & Black)
Rear (Red & Black)

Sold out

- Light weight hydraulic rim brake from Echo!
- Packed with lots of clever weight saving ideas while keeping high performance a priority.
- Custom 14mm piston is the same size as standard HS33 brakes.
- TPA adjuster is ideally positioned behind the blade, out of the way from knocks. Please note: When new, the TPA can be very stiff to turn, so we recommend that when initially setting the TPA dial to use the allen key broaching located at the end of the pushrod.
- Titanium bleed and lever clamp bolts.
- Lever blade design offers 29% more power than a standard 2005 HS33 brake with 2-finger blade, and 12% more than the same brake with a 4-finger blade.
- Available with either 80cm (front) 120cm (rear) hoses.
- Slave cylinders are 5mm less wide than Magura HS33 models, offering improved crank clearance on tight setups.
- No brake mounts, pads or cylinder washers are included.
- Comes fully bled with mineral oil and can only be run on mineral oil.
- Weight: 185.7g (front), 195.6g (rear).

Additional Information

These levers come with a 6 month warranty covering manufacturing defects and materials, which also covers the sealing of the brake. Please note that using water to bleed the brake will invalidate the warranty.

Questions

Dave

Interested in getting a rear rim hydraulic fitted to my inspired element 24 inch. What do i need to buy with this lever as assume this is just a lever and not a complete set? Need good braking power so willing to spend about £200 all in. Cheers.

Posted by Dave on 16/08/2015

Reply from TartyBikes on 17/08/2015

Hi Dave - thanks for your question. This product is a complete brake, not just the lever, but because your frame uses v-brake mounts you would need to use Magura Evo2 mounts. We do not currently have these in stock and are not sure when we will as getting hold of them is a little tricky. Using the most suitable brake pads would improve performance further - Rockman Green pads are great for a smooth rim, or something like the TNN ADMs for a grind. If you currently use standard black pads, a big difference to braking performance can be made by simply changing the brake pads for the Onza Ice pads (http://www.tartybikes.co.uk/product.php?product_id=11525) which are a softer compound, increasing stopping power. Hope that helps. Thanks, Flipp.

Mark

Hey guys I have the Echo TR rear rim brake on my old onza blade 20" witch is better than the stock cable brake I have on now but I was wondering if it would fit my inspired flow 2015 (purple) without needing any mounts or anything... So just to swap them without needing anything extra as it seems hard to find parts for that ( if that makes sense?) but anyway Cheers guys as always

Posted by Mark on 25/02/2016

Reply from TartyBikes on 26/02/2016

Hi Mark - As your Flow frame would usually have a rear V-Brake, you would need to get yourself a set of Magura Evo2 Adaptors to fit your Echo brake to it. The Blade has 4-bolt rim brake mounts which are the standard mounts hydraulic rim brakes are fitted to, whereas you'll need the Evo2 adaptors to bolt them on to a V-Brake post. Thanks, Mark

James Sanders

Can This lever set up be used in conjunction with disc brakes , if you replace the rim brake with disc brakes

Posted by James Sanders on 25/02/2016

Reply from TartyBikes on 25/02/2016

Hi James - It can be done, although the difference in leverage ratio and piston size from rim brake to disc brake levers mean that it wouldn't work as well, unfortunately. Thanks, Mark

Reviews

Write a review

Not yet rated

People who bought this also bought…

Shimano SLX RT66

Product code: 12334

From £18.00 to £27.00

80%

From £18.00 to £27.00

From £18.00 to £27.00

In stock In stock

View options

In stock

In stock

In stock

In stock

RockMan Austin V3 (Includes FREE Bar & Stem!)

Product code: 12902

£249.00

20" Frames

2 colours available

£249.00

2 colours available

Check Stock

Check Stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top