• Opening Hours.
    Fri: 9.00am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Magura MT7 Danny MacAskill Signature Series

Product code: 13303


Sold out

Magura MT7 Danny MacAskill Signature Series

Final pair of brakes!

- Super limited edition Danny MacAskill Signature Series version of Magura's popular MT7 disc brakes!
- Based on the MT7 brakes, but with some upgrades and finishing requested by Danny himself.
- All-new aluminium HC3 lever blade features independent mechanical leverage ratio adjustment and reach adjustment dials.
- Unique reach adjustment sees just the tip section of the blade move, to allow you to get the lever blade to your desired position without affecting the leverage ratio or bite point of the brake.
- Mechanical leverage ratio adjustment is adjusted by using an adjuster screw that moves the position of the pushrod relative to the pivot point of the lever, similar in principle to Avid's Speel Dial system.
- The rear of the blade features smoothed off edges to reduce any painful knuckle interactions!
- Carbotecture lever body construction - as featured on the rest of Magura's MT-series disc brakes - helps keep weight low.
- Lever has a flip-flop design and can be used with either hand.
- Super powerful 4-piston caliper is the same tried-and-tested caliper found on the MT7 brakes.
- Forged aluminium caliper means there is only material where it is needed, resulting in an impressively light brake considering its power.
- Post Mount caliper style makes setting up the brake easy, and is compatible with both Magura and Hope Post Mount caliper to IS mount frame/fork adaptors.
- Kevlar reinforced hose attaches to caliper with a banjo bolt, making it easy to tuck the hose as out-the-way as possible on the bike.
- Supplied complete with olive and instructions on how to cut the hose down to your desired length (supplied at 230cm), alternatively we can do this for you here.
- Raceline caliper and bar clamp are a throwback to Danny's past love of the original Magura HS33 brakes.
- Sold as a pair of brakes with full length hoses, mounting hardware and two spare sets of replacement pads!
- Brakes come in a Danny MacAskill signature embossed tin. Please note: Some tins feature smalls marks/imperfections from transit from Magura.
- Brake is NOT supplied with adaptors or rotors.
- Weight per brake: 282g

We have made a disc brake guidance and information sheet which will be very useful if you are not experienced with disc brakes (or even if you are!). We strongly recommend having a look over it before fitting your new brake. This can be downloaded here.

Please note: Damage caused to the brake by impacts either through the lever or directly to the lever body will not be covered under warranty. This includes breaking the lever blade, or causing damage to the lever pivot area.

Additional Information

Please note, some of the metal tins have very slight bumps and marks on them. This is how they have arrived from Magura. The contents are not affected at all.


Koju Suda

Nice to meet you I am Koju who lives in Tokyo. I have a question. I'd like to purchase the "Magura MT7 Danny MacAskill Signature Series" that I sell at your store. I am ready to pay additional fee to ship to Japan. Even if it's a service you do not normally do at your store, I want a special response. I am sorry to make a bothersome order. Best regards Koju

Posted by Koju Suda on 07/04/2017

Reply from TartyBikes on 07/04/2017

Hi Koju - It is no problem to ship to Japan, we do it regularly! To check shipping prices, you may add the MacAskill MT7 brakes to your basket then go to the Checkout. Our website will calculate shipping options and prices for you, with no obligation to buy. Please note that you will have some import duty/customs fees to pay when your order arrives. Thanks, Mark


Hey. I got a problem with these brakes. If I stand still on my bike & try to pull the wheels forward or backwards while pulling the brake, there's a little bit of play due to the retaining pin being too thin compared to the hole in the pads. Is it supposed to be like that? Thanks.

Posted by Johan on 23/05/2017

Reply from TartyBikes on 23/05/2017

Hi Johan - The retaining pins are designed to be a little undersized compared to the holes in the pads so that if they heat up, there's room for expansion. If the brakes are new then this pad knock will go away as the pads bed in. In my own MT7 brakes I used the Trialtech MT5 pads - these are one piece per side and don't use the retaining pins, so they hold in place much better. The compound is also a little more suitable for trials than the Magura pads. Thanks, Mark


491$ это цена за оба тормоза - передний и задний?

Posted by Artyom on 06/12/2017

Reply from TartyBikes on 07/12/2017

Hi Artyom - This price is for a pair of brakes. Thanks, Mark

Ayoub Talha

Hello, I was wondering if you stil have the Magura MT7 Danny Macaskill edition in stock , I live in the US so Iím guessing you guys can ship worldwide ? Thank you in Advance

Posted by Ayoub Talha on 07/12/2017

Reply from TartyBikes on 08/12/2017

Hello - All the stocks levels on our website are live, and we only put products in stock if they're here in the warehouse. As a result, at the time of writing, these brakes are in stock and ready to go. We ship to the US every day! With FedEx Priority shipping usually only takes 1 working day, with Economy it will typically be 3-4. To get an idea of prices, simply add a set of brakes to your basket and click the 'View Basket' button. Our website will automatically calculate shipping options and prices for you. Thanks, Mark


Hi , would you recommend these brakes for enduro or downhill use? Thanks

Posted by David on 12/02/2018

Reply from TartyBikes on 13/02/2018

Hi David - The base MT7s that these brakes are based on are designed for 'Gravity' riding by Magura, so they work extremely well for downhill and enduro use. Thanks, Mark


Write a review

Not yet rated

People who bought this also bought…

TartyBikes Disc Brake Hose Shortening & Re-Bleed

Product code: 369

From £14.00 to £22.00

From £14.00 to £22.00

From £14.00 to £22.00

In stock In stock

View options


In stock

In stock

Hope IS Frame/Fork to Post Mount Caliper Adaptor

Product code: 10773


Disc Brake Adaptors

1 colour available


1 colour available

Check Stock

Check Stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough