• Opening Hours.
    Wed: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

RockMan CNC Pads

Product code: 11090

£25.00

Check Stock

RockMan CNC Pads

Blue backings, Aqua material
Blue backings, Blue material

Sold out

- Super-high performance pads from RockMan, now fitted into CNC machined blue or grey anodised aluminium alloy backings to improve braking power and response.
- Extensive testing carried out with some of the World's top riders to ensure arguably the best performing pads we've used!
- 6mm of pad material allows plenty of wear life.
- Aggressive bite and sound with bucket loads of lock and power.
- Individually hand made to ensure the best quality products.
- Top secret compound offers the best performance in both dry and wet conditions (as long as they are used with a grind)!
- Pads are 46mm in length with refills available separately.

Recommended Use

Sharp light grind for dry weather, sharp slightly deeper grind for wet weather. Can also be used on a smooth rim in dry weather.


Important

Due to the very stiff backings, it is imperative that these pads are set up perfectly squarely.

Additional Information

Always ensure that the O-ring is lubricated before fitting the pads, this will allow it to fit over the pin on your brake cylinder more easily.

Supplied as one pair (2 pads) as shown.

Please note that the use of tar, brake spray or other substances can have adverse effects on the life of brake pads and we are unable to accept responsibility for this.

Questions

Tyler Murphy

Would these pads fit onto a Echo trial 2013.. Thanks

Posted by Tyler Murphy on 16/10/2013

Reply from TartyBikes on 17/10/2013

Hi Tyler - yes, these pads will fit just fine. Thanks, Flipp.

Maciej Rozwadowski

hi guys, which pad is better the TNN Engineering LGM or RockMan Blues? thanks in advance :)

Posted by Maciej Rozwadowski on 04/10/2011

Reply from TartyBikes on 05/10/2011

Hello - Personally, I'm more of a fan of the LGM pads, but as you can see from the Reviews section of both brake pads, people seem to get on well with both. Thanks, Mark

chad lamb

would these pads work on a medium harsh grind?

Posted by chad lamb on 22/02/2011

Reply from TartyBikes on 23/02/2011

Hi Chad - They should work fine, although as with all pads the harsher the grind the shorter their lifespan will be. Thanks, Mark

Reviews

Write a review

100%

Based on 5 customer ratings

Paul

Very good

Posted by Paul on 04/12/2010

Easily the best pads i have ever used. Great wear life. Amazing bite and sound, really good in all conditions. Recommended.

endre

best pad ever!

Posted by endre on 07/12/2010

this is the best brakepad ever! the biting power is awsome with good sound. dont even hasitate to buy this pad! recommended

Kevan

Brilliant :)

Posted by Kevan on 13/04/2013

These pads are amazing in wet weather and dry weather. They hold really well and have a nice bite, the noise is so loud. I love these pads and would recommend to anyone who want to pay that price...overall a great product, Thanks.

Reply from TartyBikes on 15/04/2013

Hi Kevan - I'm glad you like your new pads. Some of our riders have used them before and they do seem to be good, consistent pads. Thanks for the review!

ProfPoopyPants

Excellent pads, but buyer beware...

Posted by ProfPoopyPants on 26/07/2017

First, let me say that these pads are awesome, and I would definitely buy them again. BUT I ran into one issue, which other people might want to know about (read on). THE GOOD: I've been riding them on the rear brake for the last six months (about 50-60 hours), and the material has only worn down a bit. I'll easily be able to get another 100-150 hours out of them before the material needs to be replaced. The backings are solid and really stiff, and I don't feel any flex at all. The pad material's bite is fantastic with a medium grind, but when the grind starts to die out, the pad will slip a little (especially in the wet). Just keep up your grind, and you'll be all set. The noise? Yeah, they're loud, but come on, what rim pads aren't? THE BAD: Here's the problem I ran into. The width of the backings were about 0.4mm too thick compared to the Magura HS33 cylinder (more detail here: http://www.observedtrials.net/vb/f3/rockman-cnc-backings-too-big-magura-hs33s-54678/). Were the Rockman backings too wide? Were the Magura cylinders too narrow? I don't know, but the result was that the backing didn't fit. In the end, I had to file down the backings for them to fit in the brake cylinders and have them move freely without getting stuck in the cylinder prongs. ...and that kinda sucks.

Reply from TartyBikes on 26/07/2017

Thanks for your review and all the detail, Daniel! We've passed your feedback on to Rockman so I am sure they will check this out and address it in the near future. Thanks again.

People who bought this also bought…

KMC K710 Kool, 1/8''

Product code: 174

£12.00

100%

£12.00

£12.00

In stock In stock

Add to basket

In stock

In stock

Jitsie Dynamik Shinguards

Product code: 12257

£32.00

80%

Protection

2 colours available

1 offer available

Spend £100 on Jitsie apparel, get 10% off - use code JITSIETEN at checkout

£32.00

2 colours available

  • Available in Red or Black!
  • Super light and flexible!
  • Nobody likes a pedal to the shin!

£32.00

In stock In stock

View options

In stock

In stock

RockMan Blue Refills

Product code: 11165

From £12.49 to £15.00

100%

From £12.49 to £15.00

RRP: £15.00

Save up to 17%

From £12.49 to £15.00

RRP: £15.00

Save up to 17%

Check Stock Check Stock

View options

Check Stock

Check Stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top