• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Heatsink CNC Yellows

Product code: 11544

£25.00

On order

Heatsink CNC Yellows

High quality HS33 pads from Heatsink, with CNC backings for extra stiffness.

- Tested and developed with several top riders, the Heatsink range of CNC Yellow pads have been designed and manufactured in Cambridgeshire.
- Featuring Heatsink's yellow pad material, designed to give great bite and hold when used in conjunction with a sharp, medium grind.
- Unique CNC pad backings improve brake stiffness.
- Fitted to the brake cylinder using an O ring, this ensures a snug fit.
- 8mm of pad material ensures a long-lasting pad.
- Loved by street riders for their aggressive bite.

Recommended Use

Sharp medium grind, dry weather, slightly deeper grind for wet weather.

Important

Due to the very stiff backings, it is imperative that these pads are set up perfectly squarely.

Additional Information

Always ensure that the O-ring is lubricated before fitting the pads, this will allow it to fit over the pin on your brake cylinder more easily.

Supplied as one pair (2 pads) as shown.

Please note that the use of tar, brake spray or other substances can have adverse effects on the life of brake pads and we are unable to accept responsibility for this.

Questions

zander morris

would these pads work on my bike i have a onza comp 09 thanks :)

Posted by zander morris on 11/08/2011

Reply from TartyBikes on 11/08/2011

Hi Zander - These pads fit any hydraulic rim brake, so I don't think you'll have a problem with using them on your Comp. Thanks, Mark

Gabe

Hi, just wondering what can happen if these pads wern't set up perfectly square?.. Cheers...

Posted by Gabe on 21/11/2011

Reply from TartyBikes on 22/11/2011

Hi Gabe - The only thing that happens is that pad wear will be increased (as you're braking on a smaller area, because the pad is only contacting on a certain part of the actual material), and braking performance will be decreased. For pads with plastic backings, the backings can flex and mean that even if they're not set up well the pad itself will 'bend' to fit the rim. However, with CNC backed pads, the backings are so stiff that they won't bend/flex to fit the rim. It's not going to necessarily ruin your brake, but to get the best out of any CNC backed pad it's best to get them as square as possible. Thanks, Mark

Mark Macleod

Hi guys, i bought these pads a while ago and I am just getting around it fitting them now... do i need to buy rubber o rings to fit these pads to the hs33's as they are not clicking in correctly, cheers guys!

Posted by Mark Macleod on 01/03/2017

Reply from TartyBikes on 01/03/2017

Hi Mark - The pads should already have some little O-rings fitted in there. A drop of oil inside the opening in the back of the pad by the O-ring should help them click on properly. Thanks, Mark

Reviews

Write a review

100%

Based on 5 customer ratings

Dean

awesome

Posted by Dean on 06/07/2012

I was told to bin my standard blacks and finally have - these pads are awesome! They have huge bite and endless grip with a good sound aswell.

Reply from TartyBikes on 09/07/2012

Hi Dean - I'm glad you like the pads! They're definitely a big step up from the standard Magura black pads. Thanks for the review.

ashley

superb

Posted by ashley on 05/09/2012

Very bitey pads with excellent hold and sound on a medium grind. Metal backings are very stiff, and the new o rings are much tighter so they don't move. Come with a lot of brake material. Was too much for one bike.

Reply from TartyBikes on 05/09/2012

Hi Ash - Thanks for the detailed information! Compared to standard pad backings, CNC backings do seem to make a large difference to brake performance. Sorry to hear about the setup issues you experienced though - it can happen on certain setups due to the extra material offered, although it's relatively easy to trim the material down should you need to. Thanks for the review!

ashley

superb

Posted by ashley on 05/09/2012

Very bitey pads with excellent hold and sound on a medium grind. Metal backings are very stiff, and the new o rings are much tighter so they don't move. Come with a lot of brake material. Was too much for one bike.

Reply from TartyBikes on 05/09/2012

Hi Ash - Thanks for the detailed information! Compared to standard pad backings, CNC backings do seem to make a large difference to brake performance. Sorry to hear about the setup issues you experienced though - it can happen on certain setups due to the extra material offered, although it's relatively easy to trim the material down should you need to. Thanks for the review!

Maciej

Great bite and hold as well as sound

Posted by Maciej on 16/09/2012

These pads have bedded in within about an hour, slipped a few times during bedding in but now when I pull the lever they bite instantly and hold very well. The sound of these is incredible, would recommend to anybody.

Reply from TartyBikes on 17/09/2012

Hi Maciej - When Stan first tried a set of these pads we were amazed by the volume too. I'm glad you like them!

Eric

Great Pads!!

Posted by Eric on 10/08/2014

I use these pads on a smooth rim. I wanted to ride unground for as long as I could and leave my options open to grinding without having to change pads. So far the outperform every other pad I've used on ground rims.

People who bought this also bought…

Trialtech Rim Tape

Product code: 10284

£2.00

100%

Rim Tapes

2 colours available

£2.00

2 colours available

Check Stock

Check Stock

Five Ten Danny MacAskill Shoes

Product code: 13214

From £89.99 to £99.00

Shoes

5 colours available

From £89.99 to £99.00

RRP: £95.00 to £99.00

Save up to 5%

5 colours available

From £89.99 to £99.00

RRP: £95.00 to £99.00

Save up to 5%

Check Stock Check Stock

View options

Notice

Check Stock

Check Stock

Trialtech Carthy Signature Series Caged Pedals

Product code: 13083

From £35.00 to £69.00

From £35.00 to £69.00

  • Titanium or Steel axle options!

From £35.00 to £69.00

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top