Heatsink CNC Oranges (Pair)

Opening Hours.
Closed All Day (UK)
United Kingdom.
01772 32 33 33
International.
0044 1772 32 33 33

Heatsink CNC Oranges (Pair)

Product code: 13609

Overview
Additional Information
Questions

Work best with: Medium grind.

- Based on their tried-and-tested Yellow compound material, the Heatsink range of CNC Orange pads have been designed and manufactured in Cambridgeshire.
- Injection moulded to ensure perfect pad surfaces, along with no bubbles in the pad material.
- Featuring Heatsink's orange pad material, designed to give great bite and hold when used in conjunction with a sharp, medium grind.
- Unique CNC pad backings improve brake stiffness.
- Fitted to the brake cylinder using an O ring, this ensures a snug fit.
- 8mm of pad material ensures a long-lasting pad.
- Loved by street riders for their aggressive bite.

Recommended Use

Sharp medium grind, dry weather, slightly deeper grind for wet weather.

Important

Due to the very stiff backings, it is imperative that these pads are set up perfectly squarely.

Additional Information

Always ensure that the O-ring is lubricated before fitting the pads, this will allow it to fit over the pin on your brake cylinder more easily.

Supplied as one pair (2 pads) as shown.

Please note that the use of tar, brake spray or other substances can have adverse effects on the life of brake pads and we are unable to accept responsibility for this.