Telephone (International): 0044 1772 32 33 33
Telephone (UK): 01772 32 33 33
- Ideal for newer frames such as the Koxx Sky 2 20", the Hope Tech Evo V2 brake features the new Tech Evo lever and the V2 caliper.
- Based heavily upon the tried-and-tested Hope Tech lever, the Tech Evo lever features a cam system in place of the traditional Tech push-rod system, allowing smoother lever pull.
- Independent Reach Control and Bite Point adjusters allow you to fine tune your brakes more than any other type of hydraulic disc brake around!
- Lever works for both left and right hand, simply by turning it the other way up.
- Fitted with kevlar reinforced plastic hosing, which saves up to 50g per brake over the stainless hose, or stainless hosing which is much tougher.
- Utilises the post mount Hope V2 Caliper, which is CNC machined from a solid billet of 2014 T6 aircraft spec aluminium alloy.
- 25mm piston - the same size as the Hope Trial caliper - gives plenty of power.
- Caliper design allows the use of the Hope Mono/Tech Trial pads, including the new Pro pads.
- Supplied pre-bled with Dot 5.1 fluid.
- Supplied with a 160mm Hope Mono Trial rotor, two M6 x 18 caliper fitting bolts and rotor bolts.
- Weight including brake, rotor and bolts: 411g (Brake only: 284g!), add 61g for stainless hose version.
- Based heavily upon the tried-and-tested Hope Tech lever, the Tech Evo lever features a cam system in place of the traditional Tech push-rod system, allowing smoother lever pull.
- Independent Reach Control and Bite Point adjusters allow you to fine tune your brakes more than any other type of hydraulic disc brake around!
- Lever works for both left and right hand, simply by turning it the other way up.
- Fitted with kevlar reinforced plastic hosing, which saves up to 50g per brake over the stainless hose, or stainless hosing which is much tougher.
- Utilises the post mount Hope V2 Caliper, which is CNC machined from a solid billet of 2014 T6 aircraft spec aluminium alloy.
- 25mm piston - the same size as the Hope Trial caliper - gives plenty of power.
- Caliper design allows the use of the Hope Mono/Tech Trial pads, including the new Pro pads.
- Supplied pre-bled with Dot 5.1 fluid.
- Supplied with a 160mm Hope Mono Trial rotor, two M6 x 18 caliper fitting bolts and rotor bolts.
- Weight including brake, rotor and bolts: 411g (Brake only: 284g!), add 61g for stainless hose version.
Hope Universal
£20.83
Onza Rim Tape
£1.66
Save 35%
Trialtech Rim Tape
£2.55
Maxxis Holy Roller
£20.83
Bonz Expert Front Disc
£33.33
Bonz Expert Rear Disc
£45.83
Hi! Do you have a expected date for the hope tech evo v2 back on stock? Thanks!
Posted by Diego Brito on 20/12/2011
Reply from TartyBikes on 22/12/2011
Hi Diego - We've placed an order for these brakes and hope to have them back in stock early in the new year. Thanks, Mark