• Opening Hours.
    Tue: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

TartyBikes RD Snail Cam (Single)

Product code: 14294


In stock

TartyBikes RD Snail Cam (Single)

New to Tarty Bikes, our own range of 'RD' (Read Design) components!

Want to find out more about how these products were designed and tested? Adam Read talks us through his design process here.

  • Affordable, useful, and durable. The RD range of products!
  • Designed by Tarty Bikes founder Adam Read, and tested by us.
  • Made right here in the UK!
The RD (Read Design) range of parts was born from a desire to bring popular, and useful products back to the sport of trials. Designed to be economical, durable and easy to fit, all the RD parts are great problem solvers that look stylish, don't break the bank, and are made in the UK too! Created by Tarty Bikes founder, Adam Read, each RD part has been designed for a wide range of compatibility, with decades of trials knowledge applied to the design of each component. Parts intended for high stress use have been FEA stress tested, and physically tested by us on our own bikes, to ensure they offer performance and durability.

- Stainless steel snail cam, designed by Tarty Bikes founder, Adam Read!
- Unlike most snail cams, our RD cams are sold individually which means you don't have to buy a pair if you only need to replace one, or want to run a single cam on the drive side.
- Laser cut from durable SAE 304 stainless steel, right here in Bamber Bridge, UK!
- 304 stainless steel has a higher density compared to mild steel and aluminium of equivalent thickness, this means it resists deforming under load, increasing the life span of the part.
- All RD products are collected direct from the manufacturer by Ben on his trusty single speed bicycle! Better for the environment, and Ben's fitness.
- Raw stainless steel material, and discolouration from the laser cut process gives a cool, industrial looking finish!
- Laser etched Tarty Bikes logo on the adjustment arm!
- Large diameter of 40.8mm at its widest point, the RD cam gives a large range of adjustment, with a large thumb tab to make those adjustments more comfortably!
- Well defined notches give a nice firm 'click' when making adjustments, ensuring the cam is located correctly.
- 3mm thickness is compatible with a wide range of hubs. Additional hub spacers can be purchased here.
- 10mm axle hole diameter to work with most M6 bolt hubs.
- Available in silver only.
- Sold singly.
- Weight: 23.3g

Additional Information

Please note: All RD parts feature surface imperfections, and discolouration on the edges of one side of the part. This is a by-product of the laser cut process, and in no way affects fit or function. Each part is QC checked by us to make sure tolerances are correct for its designed function. The small well on RD parts, visible as a small 'U' shaped cut in one of the edges of the part, is the start / stop point of the laser. We purposely designed this feature on all RD parts to ensure a clean start and finish during the laser cutting process. Tarty Bikes logos are laser etched in, and will vary in definition and finish depending on the part.


There are currently no questions relating to this product.


Write a review

Not yet rated

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame



This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy