There are currently no questions relating to this product.
Based on 4 customer ratings
£4.00
In stock
In stock
£4.00
In stock
In stock
Product code: 13208
From £2.49 to £5.00
From £2.49 to £5.00
RRP: £5.00
Save up to 50%
New to trials? Then check out our product video guides for useful tips and technical advice
Follow us on Facebook for exclusive deals, promo codes and offers
Have a question? No problem, call us on 01772 32 33 33 or get in touch via our contact page.
TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN
Web Design & Development by tame
Should be a standard
Posted by Adam
After using v-brake for more than decade i finally switched to full hs33. Default magura plastic washers were always a nightmare. These washers should be a default on every bike. Brilliant.
Reply from TartyBikes
Thanks for the great review, Adam!
We wholeheartedly agree. Trialtech cylinder washers are a massive improvement over OE spec plastic Magura washers, as they don't crush, and allow much finer, repeated, adjustment.
Ben
Best upgrade
Posted by Simon
The best upgrade for easy brake adjustments Can't go wrong purchasing it
Reply from TartyBikes
Hi Simon!
Cylinder washers are an overlooked part, but top quality ones like these really do make a difference. We're glad you've found the same.
Thanks for the review!
These work. They really work.
Posted by Jon
After years of faffing about with HS33’s on a number of bikes, I spotted these. Previously, I’ve never been able to get the brakes set up to with a couple of mm of the rims, as the standard plastic cylinder washers have too much flex in them and tend to deform once torqued down, so that they become ridged on the inside and then can’t be adjusted finely as they slip between notches that have formed on the inside of the washer. In comparison, these are miraculous. Easy to fit and much easier to get initially snug, but with fine adjustment then available so that you can get them set up just so before finally tightening to the correct torque. I am buying another set of these beauties for another bike. A great Trialtech product and the usual impeccable Tartybikes service.
Reply from TartyBikes
Hi Jon!
We've been fans of these for a long time, and it's great to hear they've worked out well for you too.
Thanks for the detailed review, and for the kind words!
If only I'd known!
Posted by Jim
I'll admit it, I was placing an order for Magura brake clamps, and when Adam recommended these washers, I was a wee bit dubious - they're round-ish washers, and round-ish washers is round-ish washers, right? There's only so much room for improvement on something so simple. But, I was placing an order anyway, and for $5, figured I'd give it a try. Daggone. These things are freaking awesome! They don't get stuck in the grooves on the calipers like the standard Magura plastic washers tend to after being tightened a few times, and they offer exquisite position adjustment as a result. My brakes are better aligned than they've ever been, and the difference in brake grab/hold is noticeable. If you're running clamps that use washers, do yourself a favor, and get these little gems!!
Reply from TartyBikes
Hi Jim!
Thanks for the review. We're really glad that the washers did the trick for you. It's funny how such a small change can make such a big difference!
Thanks again.