• Opening Hours.
    Wed: 9.00am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Trialtech Crossover

Product code: 12930

£7.08

Check Stock

Trialtech Crossover

Black, M6/M6
Black, M6/M8 (including olive)
Blue, M6/M6
Blue, M6/M8 (including olive)
Clear, M6/M6
Clear, M6/M8 (including olive)
Green, M6/M6
Green, M6/M8 (including olive)
Red, M6/M6
Red, M6/M8 (including olive)
White, M6/M6
White, M6/M8 (including olive)
Yellow, M6/M6
Yellow, M6/M8 (including olive)

Sold out

- Colourful, pre-assembled crossovers to match their rim brake hose from Trialtech!
- Suitable for all brands of rim brake slave cylinders.
- Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and Trialtech Olive at the other.
- Extra-long 23cm long hose prevents creasing, which often leads to failure.
- All Echo, Racing Line and pre-2011 Magura slave cylinders will require the M6/M6 option. 2011 and 2014 Magura slave cylinders require the M6/M8 option. If you are not sure which option you need, please get in touch and we will be able to tell you.
- Please note that these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.
- Available in Black, White, Red, Blue, Yellow, Green and Clear.

Questions

Craig blight

Getting this for 05 hs33 slaves. Will these fit OK? And do I need olives for it. I know need olives for hose from lever to slaves but not sure if need them for this hose any help would be great

Posted by Craig blight on 10/12/2017

Reply from TartyBikes on 11/12/2017

Hi Craig - Theoretically you should need an M6/M8 cross-over, but it'd be worth double checking the fittings on yours to make sure. If one side has a shroud nut and olive, you'll need the M6/M8. If both sides use a barbed fitting then you'd need M6/M6. Thanks, Mark

s

I have got a pair of 2017 magura hs11 and while both ends of the crossover use barbed fittings that look identical when fitted, they actually turned out to be M6 and M8. So it is a good idea to remove your old crossover to be really sure what type is needed.

Posted by s on 19/04/2018

Reply from TartyBikes on 19/04/2018

Hello - All modern Magura brakes (after 2011) will require the M6/M8 version, so it's worth going for that option if you have a good idea of when your brakes are from. Although the M8 version we stock uses an olive and shroud nut, this uses the same thread as the M8 barbed fittings Magura used so it works fine. Thanks, Mark

Reviews

Write a review

Not yet rated

People who bought this also bought…

Hope IS Frame/Fork to Post Mount Caliper Adaptor

Product code: 10773

£14.50

Disc Brake Adaptors

1 colour available

£14.50

1 colour available

£14.50

In stock In stock

View options

In stock

In stock

Trialtech Carthy Signature Series Brake Clamps

Product code: 13085

£33.00

£33.00

£33.00

In stock In stock

Add to basket

In stock

In stock

Trialtech Olives (pack of 2)

Product code: 12870

£2.00

£2.00

£2.00

In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top