• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Jitsie Hybrid Alloy Riser

Product code: 13648

£40.83

On order

Jitsie Hybrid Alloy Riser

  • "Hybrid" design, for use on street or competition bikes.
- Based on Jitsie's super popular, tried-and-tested Alloy Riser bars, the new Hybrid Alloy Riser.
- Designed to bridge the gap between street and trials, the Hybrid risers are suitable for either street or competition use!
- Oversized 31.8mm handlebar clamp for increased strength and stiffness in this key area.
- 730mm width with markings under the grip area to aid with cutting down if you wish.
- 99mm of total rise makes them suitable for either street or competition frames with mid to high BB rise.
- Less upsweep and backsweep than their competition bars brings them more in lines with street bars, at 4 up and back.
- Finished in tough anodised black with stylish white transfer graphics.
- Weight: 338g

Geometry

Width: 730mm (28.75in)
Total rise (click text to see a diagram): 99mm
Upsweep: 4
Backsweep: 4

Questions

Chris Biasini

Yes, just checked the measurements on my Haro and the stem is 1 1/8 in what comes out to 28.57 mm. So would need different stem

Posted by Chris Biasini

Reply from TartyBikes

Hi Chris!
In that case, something like the Acor Forged Stem in a 50mm or 60mm length or the BBB Forged Stem in 70mm length should be fairly similar to what you have already, although with a little more rise. If you're looking to fit higher rise bars such as the Jitsie Risers then that might not be a bad thing!
Hopefully this helps - as ever, if you need more assistance just let us know.

Chris Biasini

Looking for new bars for my Haro jump bike. Will your bars be able to fit on my bike? Thank you

Posted by Chris Biasini

Reply from TartyBikes

Hi Chris!
All of our bars, unless otherwise stated, use a 31.8mm bar clamp size so you'd need to double check that against your current bar/stem.
If you're using standard steel bars then chances are they'd be a smaller bar clamp diameter so you'd need to change stem to use higher rise alloy bars like these.
The stems we sell should fit your Haro forks. They will have slightly different geometry, but that might be beneficial if you're looking to change up the feel of your bike.
If you'd like to check your current bar/stem measurements, feel free to e-mail us your results and we'll see if we can recommend something suitable.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Inspired Flow 4-Bolt Bashring

Product code: 13150

£19.00

£19.00

£19.00

On order On order

Stock reminder

On order

On order

Echo Foam (with Bar Plugs)

Product code: 13044

£5.00

£5.00

£5.00

In stock In stock

Add to basket

In stock

In stock

Clean Forged

Product code: 12916

£29.00

£29.00

  • Various sizes available!

Check Stock

Check Stock

  • © TartyBikes Ltd, 2019
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top