• Opening Hours.
    Tue: 9.00am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Hope Tech 3 Lever

Product code: 12303


In stock

Hope Tech 3 Lever

Black, Left Hand
Black, Right Hand
Red, Left Hand
Red, Right Hand

Sold out

- The most up to date model of Hope Tech brake lever!
- This version sees the return of the single reservoir. This allows the lever to be around 20% lighter than the earlier model, though at the expense of it's flip-flop design.
- Hope have also increased the leverage on this new model with a 5% power increase over the older Tech Evo levers.
- Will work with the majority of Hope calipers including the Trial Zone, Mono Trial, X2, E4, V2/V4 and M4.
- Split lever clamp design allows you to fit and remove the lever without removing your grips, which is handy!
- The Evo system uses a roller to join the control dials and push rod, giving a smoother action and improving power.
- Supplied as a complete lever, simply fit your existing hose with the fittings supplied, re-bleed and you're away!
- Black & Red stocked as standard, but all the usual Hope colours are available to special order, simply contact us.
- Left and right hand versions available.
- Weight: 102.8g



Is this compadable with XTR DI2 shifters? The tech 2 levers are not. Thanks Mile

Posted by Mike on 17/06/2015

Reply from TartyBikes on 17/06/2015

Hi Mike - thanks for your question. We have no experience with those shifters so cannot say. Your best option would be to ring Hope. Thanks, Flipp.


Can you run hydraulic rim brakes with these levers Thanks. James

Posted by James on 09/11/2015

Reply from TartyBikes on 10/11/2015

Hi James - These levers won't work with hydraulic rim brakes. Almost all hydraulic rim brakes feature seals designed to work with mineral oil whereas the Hope levers use DOT fluid. Another key issue is that the Tech 3 lever piston is quite a lot smaller than a rim brake lever piston so you wouldn't get the correct amount of fluid movement. Thanks, Mark


Is this lever compatible with echo callipers and lines.

Posted by Eden on 21/11/2015

Reply from TartyBikes on 23/11/2015

Hi Eden - Unfortunately this lever isn't compatible with the Echo brakes, sorry. The Hope lever uses DOT-specific seals whereas the Echo uses mineral oil specific seals. Thanks, Mark


is this lever will be compitable with mono 6 caliper?

Posted by adam on 24/05/2018

Reply from TartyBikes on 24/05/2018

Hi Adam - This lever would work fine with that caliper. Thanks, Mark


Write a review

Not yet rated

People who bought this also bought…

Hope Trial Zone V2

Product code: 13108

From £30.00 to £35.00


From £30.00 to £35.00

  • The recommended rotor for all Hope Trials brakes!
  • Gives excellent power, bite and modulation.
  • Also a great upgrade if you have Echo Disc Brakes!

From £30.00 to £35.00

Check Stock Check Stock

View options

Check Stock

Check Stock

TartyBikes Multi Tool

Product code: 11247





In stock In stock

Add to basket

In stock

In stock

Hope Tech Adjuster Screw

Product code: 11956


Disc Brake Spares

7 colours available


7 colours available

Check Stock

Check Stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough