• Opening Hours.
    Tue: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Inspired Arcade V2 Crankset (With Bashring)

Product code: 12297

$259.72

In stock

Inspired Arcade V2 Crankset (With Bashring)

- Inspired's Arcade V2 Crankset!
- All-new design sees a change to square profile arms, 2-piece configuration and a larger diameter 22mm axle.
- Tough cromoly crank arms are super strong and dependable.
- Square profile increases stiffness compared to the previous generation crank arms.
- Arm profile is also more dent resistant!
- Hollow 22mm axle is stiffer and stronger than the previous generation 19mm axle.
- BB axle is pressed into the drive-side crank arm for extra strength.
- Flush fit non-drive M15 steel crank bolt helps keep everything in place.
- Dual chainring bolt boss means that either regular or micro drive sprockets can be used.
- Supplied with the 22T Inspired Arcade V2 Integrated Bashring.
- Complete with threaded Euro BB, suitable for 68mm BB shell frames. Custom spacer to allow use with a 73mm BB shell frame now available here.
- Compatible with the Inspired Arcade frame, and may fit other bikes / frames but this would be down to you as we have not specifically tested it with others.
- 175mm arm length only.
- Supplied as a kit including the full crankset with BB and Integrated Bashring!
- Weight: 1.130kg (Complete kit)

Additional Information

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

IceToolz M091 External BB Tool

Product code: 12235

£12.00

£12.00

£12.00

Out of stock Out of stock

Stock reminder

Out of stock

Out of stock

Kenda Standard 24"

Product code: 10972

From £4.00 to £4.50

100%

From £4.00 to £4.50

From £4.00 to £4.50

Check Stock Check Stock

View options

Check Stock

Check Stock

Acor Forged

Product code: 12801

£22.00

£22.00

  • Available in 50mm, 60mm & 80mm lengths!

Check Stock

Check Stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.