• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

CUSTOMER NOTICE - PHONE LINES ARE CLOSED! The move is almost complete! For important updates regarding ordering, opening hours and how to get in touch, head to the news page HERE.

SRAM GX Eagle DUB Crankset (With Inspired Bashring)

Product code: 13342

$290.72

In stock

SRAM GX Eagle DUB Crankset (With Inspired Bashring)

  • Super nice crankset from Sram & Inspired!
  • Now lighter, with the DUB system!
- New from SRAM, the GX Eagle DUB Crankset, complete with BB and direct-fit Inspired Integrated Bashring!
- As tested by the Inspired team, including our very own Ali Clarkson and Ben Travis.
- Crank arms forged then machined from 7000-series alloy for a good mix of strength and weight.
- New arm profile from the previous generation Truvativ Descendant cranks mean improved stiffness and rigidity.
- Great clearance at the rear of the crank arm gives more chain and seat stay clearance.
- For a stronger connection, the alloy BB axle is pressed into the drive side crank arm.
- Supplied BB is compatible with 68mm or 73mm BB shells.
- The IceToolz M097 BB Tool is required to fit the DUB BB (sold separately).
- For use with a 73mm BB shell, you won't require any spacers to fit the BB. For frames with a 68mm shell you will need to use one spacer on each side of the shell - these are supplied. You must also use the wavy profile spacer between the drive-side cup and the bashring.
- This 68mm or 73mm dimension refers to the width (end to end) of the frame tube where the bottom bracket fits in, please measure your frame before ordering!
- Alloy BB cups help reduce weight.
- Sealed bearings with additional bearing covers help prevent the ingress of water and dirt to keep them spinning smoother for longer.
- Pimp CNC-machined bashring is constructed from 7075 alloy, and has an integrated 22t chainring.
- Direct-mount fit to the crank arm means maximum stiffness and strength.
- Recommended for use with 3/32" chains, 1/8" chains are likely to 'scrub' the back of the bashring.
- Compatible with a range of frames including the Arcade, Fourplay and Skye.
- Supplied as a kit including crank arms, self-extracting crank bolt, BB, BB spacers, wavy spacer for drive side crank and bashring.
- 175mm arm length only.
- Weight: 694g (Complete kit, with SRAM GXP DUB BB)

Additional Information

- For use with a 73mm BB shell, you won't require any spacers to fit the BB. For frames with a 68mm shell you will need to use one spacer on each side of the shell - these are supplied. This 68mm or 73mm dimension refers to the width of frame where the bottom bracket fits in, please measure your frame before ordering!

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 477 in-lbs (54Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

EU authorised representative

Inspired Bicycles EU
2 Chemin des Frères Garbero,
Bat A3 C3,
Antibes,
06600,
France

Tel: +33761045614
Email: www.inspiredbicycles.com/contact


Technical documents, and product safety certification are available on request, direct from Inspired Bicycles:

Inspired Bicycles
Unit 2,
Gallows Industrial Park,
Furnace Road,
Ilkeston,
Derbyshire,
DE7 5EP,
United Kingdom

Tel: 01159 303603
Email: www.inspiredbicycles.com/contact


Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008

£0.50

100%

Stickers

3 colours available

£0.50

3 colours available

  • Now available in shiny Chrome Red finish!

£0.50

In stock In stock

View options

In stock

In stock

Inspired Team Riser

Product code: 13823

£69.00

£69.00

  • Based on the super popular Arcade Risers!
  • New custom butting helps save weight without compromising strength.

£69.00

In stock In stock

Add to basket

In stock

In stock

TartyBikes Tech T-Shirt

Product code: 13929

£10.00

Jerseys

2 colours available

£10.00

2 colours available

  • Casual styling married to technical performance!
  • Super comfortable on or off the bike.

Check Stock

Check Stock

  • © TartyBikes Ltd, 2026
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

Tarty Bikes, T/A Inspired Bicycles Ltd, Unit 2 The Gallows, Furnace Road, Ilkeston, DE7 5EP, UK

  • Company No. 06130891
  • VAT. GB 907878771

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy