• Opening Hours.
    Tue: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

TartyBikes RD 4 Bolt Bashring

Product code: 14297

$21.63

In stock

TartyBikes RD 4 Bolt Bashring

New to Tarty Bikes, our own range of 'RD' (Read Design) components!

Want to find out more about how these products were designed and tested? Adam Read talks us through his design process here.

  • Affordable, useful, and durable. The RD range of products!
  • Designed by Tarty Bikes founder Adam Read, and tested by us.
  • Made right here in the UK!
The RD (Read Design) range of parts was born from a desire to bring popular, and useful products back to the sport of trials. Designed to be economical, durable and easy to fit, all the RD parts are great problem solvers that look stylish, don't break the bank, and are made in the UK too! Created by Tarty Bikes founder, Adam Read, each RD part has been designed for a wide range of compatibility, with decades of trials knowledge applied to the design of each component. Parts intended for high stress use have been FEA stress tested, and physically tested by us on our own bikes, to ensure they offer performance and durability.

- Stainless steel bash ring, designed by Tarty Bikes founder, Adam Read!
- A strong, and industrial looking bash ring with in a classic 4 bolt design.
- Laser cut from durable SAE 304 stainless steel, right here in Bamber Bridge, UK!
- 94 BCD (bolt circle diameter) fits a wide range of 4 bolt cranks, including the Trialtech Race Square Taper Crank set and Inspired Flow Plus Crank Set.
- Inner bolt 'tabs' are spaced adjacently at 89.5mm, making this bash ring compatible with a wide range of crank spider arm designs.
- 304 stainless steel has a higher density compared to mild steel and aluminium of equivalent thickness, this means it resists deforming under load, increasing the life span of the part. This 4mm thick bash ring has a similar strength and stiffness to a 12mm thick alloy bash ring of the same design!
- Stainless steel construction is easy to tidy up with a file and sandpaper! If you make a mess of your bash ring, you can bring it virtually back to new again.
- All RD products are collected direct from the manufacturer by Ben on his trusty single speed bicycle! Better for the environment, and Ben's fitness.
- Raw stainless steel material, and discolouration from the laser cut process gives a cool, industrial looking finish!
- Brushed finish looks great with modern, matt and shot peened finish cranks.
- A 124mm outer diameter works great with a range of chain ring sizes.
- Want to save some weight, but still want full chain ring protection? You can cut out the back portion of this bash ring, leaving two separate pieces to protect your chain ring which ever orientation you run your cranks, and save a few grams! If you decide to do this, we recommend leaving a minimum of 10mm of material from the bolthole where you make the cut.
- Available in silver only.
- Sold singly.
- Bash ring is pictured with a Trialtech crank as an example of how it looks fitted. This crank and chain ring is NOT included with the bash ring!
- Weight: 115.6g

Additional Information

Please note: All RD parts feature surface imperfections, and discolouration on the edges of one side of the part. This is a by-product of the laser cut process, and in no way affects fit or function. Each part is QC checked by us to make sure tolerances are correct for its designed function. The small well on RD parts, visible as a small 'U' shaped cut in one of the edges of the part, is the start / stop point of the laser. We purposely designed this feature on all RD parts to ensure a clean start and finish during the laser cutting process. Tarty Bikes logos are laser etched in, and will vary in definition and finish depending on the part.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Coustellier HS33 Pads (Pair)

Product code: 12686

£30.00

100%

£30.00

  • The legendary Coustellier brake pads!
  • Hand made in France.
  • Work best with: Medium grind.

£30.00

In stock In stock

View options

In stock

In stock

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008

£0.50

100%

Stickers

3 colours available

£0.50

3 colours available

  • Now available in shiny Chrome Red finish!

£0.50

In stock In stock

View options

In stock

In stock

TartyBikes Tech T-Shirt

Product code: 13929

£10.00

Jerseys

2 colours available

£10.00

2 colours available

  • Casual styling married to technical performance!
  • Super comfortable on or off the bike.

Check Stock

Check Stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy