• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Jitsie Race with Sloping Top Cap

Product code: 13495

£57.50

In stock

Jitsie Race with Sloping Top Cap

130mm x 25°
150mm x 25°
150mm x 35°
175mm x 35°

Sold out

  • Innovative new design.
  • Knee-friendly steerer clamp!
- Brand new from Jitsie, their innovative Race stem!
- Forged from 7050 aluminium.
- Oversized 31.8mm clamp diameter to fit oversized handlebars and designed for use on 20", 24" and 26" wheeled bikes.
- Bar clamp sections machined from 7075 T6 aluminium for improved durability.
- Laser etched markings on the bar clamps help line your bars up correctly.
- Clever four bolt handlebar clamp allows easy fitting / removal of handlebars and provides even and dependable clamping. Please note that the top two bolts must be bottomed out gently before using the bottom two to clamp the handlebars in their final position. Failure to do this will crack the stem clamp and this is not covered under warranty.
- Textured finish inside the bar clamp area gives better grip.
- Unique to the Jitsie stem, the steerer clamp bolts enter from the side of the stem - this provides a rounded back to the stem helping to reduce painful knee injuries.
- Black anodised finish with stylish laser etched graphics.
- Available in a range of modern geometries.
- 25 rise with 130mm or 150mm lengths, 35 rise with 150mm or 175mm lengths.
- Supplied with top cap and bolt.
- Steerer bolts: M6 x 18. Lower bar clamp bolts: M6 x 15. Upper bar clamp bolts: M5 x 10.
- Weight - 130mm x 25: 218g. 150mm x 25: 222g. 150mm x 35: 222g. 175mm x 35: 234g.
- Clamp height - Rear: 34mm. Front: 48mm.

Compatibility
Steerer clamp diameter: 1 1/8"
Bar clamp diameter: 31.8mm

Questions

Giovanni

Is it compatible with the echo oblique spacer? Thank you!

Posted by Giovanni on 17/01/2018

Reply from TartyBikes on 18/01/2018

Hi Giovanni - the Echo Oblique spacer should work fine with this stem. Thanks, Mark

tharun shiv

Hello tartybikes! Which stem would fit better on my echo mk5, this stem or the trialtech stem!? (Im not getting a echo stem because they dont make the size i required.) Thanks in advance! :)

Posted by tharun shiv on 30/04/2018

Reply from TartyBikes on 01/05/2018

Hi Tharun - If you have an Echo which has already had the steerer cut at an angle to suit the standard Echo stem fitted to those bikes, the Jitsie stem will be a better fit as it too uses a sloping top cap so will be closer to fitting correctly. As the Trialtech stem uses a flat top cap, you wouldn't have as much steerer tube contact within the stem itself (unless you removed spacers from under the stem, if that's an option for you). You can always check the measurements by measuring how much steerer tube you have available, and comparing it to the clamp height measurements listed for each stem. Thanks, Mark

Sergey Kalder

hi guys i have the echo mark 4 and im wondering wich size do i need of the stem im 1.79 height and now i have on my bike an old stem that fits good but i dont know wich size is he.. what is your opinion ? also how can i mesure my stem to know the size? im a noob at this :)

Posted by Sergey Kalder on 29/05/2018

Reply from TartyBikes on 29/05/2018

Hi Sergey - The correct size will depend on the wheel size of your bike a little, but the 150mm x 35 stem would work for all sizes of Echo bike well. Their current 20", 24" and 26" bikes come with a 150mm x 30 stem as standard so the 150mm x 35 stem Jitsie make would do the trick. If you have a 26" Echo you could try the slightly lower 25 stem, but for your height the 35 might make it feel a little less hunched over the bars. Stem length is measured from the middle of the steerer clamp to the middle of the bar clamp, just so you know. Thanks, Mark

Reviews

Write a review

100%

Based on 1 customer rating

Yu

broken cover of stem

Posted by Yu on 29/09/2018

Hello, some Koreans have bought this system besides me. However, two users have already broken the cover of the stem. What we have in common is a problem with the Jitsie carbon handlebar system. My case was broken as soon as I hit the side hop.

Reply from TartyBikes on 01/10/2018

Hi Yu!
I'm sorry to hear you've had problems with your stem. If you can get in touch with us with some more information, we're happy to start up a warranty procedure for you with Jitsie.
Our latest stock all have revised, stronger bar clamps, so this should become a thing of the past all being well!

People who bought this also bought…

RockMan 2018

Product code: 13484

£18.00

£18.00

£18.00

In stock In stock

View options

In stock

In stock

KMC Z510 HX, 1/8", Silver

Product code: 11538

£12.00

100%

£12.00

£12.00

In stock In stock

Add to basket

In stock

In stock

Trialtech Brake Lever Piston

Product code: 13361

From £6.00 to £10.00

From £6.00 to £10.00

From £6.00 to £10.00

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top