V2 version with increased material thickness around the steerer tube clamping area!
- Integrated headset preload top cap.
- Available in a range of sizes.
- Innovative 'under bolt' bar clamp!
- New from Clean, their Pro Forged 24° Stem!
- New updated design featuring an 'under bolt' handlebar clamp to avoid painful sharp edges to the chest area for modern styles of riding.
- Lower, 24° angle works great with modern bike geometry for progressive, technical riding.
- Available in shorter 125mm length for a bitter range of fit with modern cockpit set-ups.
- M6 4 bolt handlebar clamp keeps bars secure.
- 5mm hex key bolt fittings all round mean you only need one tool to make all your adjustments!
- Forged design is stronger than conventional welded stems.
- Textured finish inside the bar clamp area gives better grip.
- Unique to the Clean Pro stem, the headset preload cap is integrated into the stem body! Please note: this is simply there to preload your headset bearings. Over-tightening your preload bolt will cause the stem to break, which is not covered under warranty.
- Includes bolt to pre-load your headset.
- Requires top of steerer tube to be cut
flat, internal stack height is 33mm.
- Black anodised finish with stylish, stealth black printed graphics.
- Available in a range of lengths.
- 24° rise with 125mm, 135mm, 145mm and 155mm lengths available.
- Steerer bolts: M6 x 18. Bar clamp bolts: M6 x 18.
- Weights - 125mm: 190g, 135mm: 201.5g, 145mm: 274, 155mm: 276
- Clamp height - 33mm (flat steerer tube cut required)
Compatibility
Steerer clamp diameter: 1 1/8"
Bar clamp diameter: 31.8mm
In stock
Technical Info
Facebook
Need some help?
