Jitsie Rim Tape

Opening Hours.
Thu: 9.30am to 5.00pm (UK)
United Kingdom.
01772 32 33 33
International.
0044 1772 32 33 33

Jitsie Rim Tape

Product code: 13208

Overview
Questions

18"	$5.39
19" Rear	$5.39
20" Front	$5.39
24" Front	$5.39
24" Rear	$5.39
26" Front	$2.68 $5.39
26" Rear	$5.39

Sold out

- New superlight rim tapes from Jitsie!
- Made of a very light grade of nylon.
- Tough enough to resist deformation or tears.
- Strong heat bonded join with a large enough hole for all types of valve.
- Silver background with Jitsie logos on one side, with a plain navy blue finish on the other.
- Widths: 19", 24" and 26" Rear: 42mm. 18" (Front and Rear), 20", 24" and 26" Front: 30mm.
- Significantly lighter than other rim tapes - the 26" Rear Jitsie rim tape is only 17.0g, a full 40g lighter than most competitor's rim tapes!

Questions

Ask a question

Hi. How do I install this rim tape? Are there instructions anywhere?

Posted by Sarit

Reply from TartyBikes

Hi Sarit

To install, remove the wheel, tyre, tube and old rim tape. Line up the valve hole, then gently stretch the Jitsie tape over the wheel, silver side facing the holes or in towards the hub. It can be quite tight to get over the rim wall, we find it helps if you use a screwdriver and gently hook it under the tape for the last bit and gently rotate it around the wheel under the tape to ease it into place. You may have to adjust the tape once on the rim to make sure it fully covers the rim holes and sits centred in the well of the rim. The tape may be a bit baggy on some trials rims, this is fine, it will tension once the tube is inflated. This method applies to all the non-adhesive rim tape we sell!

Ben