Inspired Arcade V2 Crankset (With Bashring)

Opening Hours.
Mon: 9.30am to 5.00pm (UK)
United Kingdom.
01772 32 33 33
International.
0044 1772 32 33 33

REMINDER - I will be closed on 5th to the 8th of September for my birthday weekend! I'll be out riding, and orders will ship as normal from the 9th. Thanks everyone!

Inspired Arcade V2 Crankset (With Bashring)

Product code: 12297

Overview
Additional Information
Questions

- Inspired's Arcade V2 Crankset!
- All-new design sees a change to square profile arms, 2-piece configuration and a larger diameter 22mm axle.
- Tough cromoly crank arms are super strong and dependable.
- Square profile increases stiffness compared to the previous generation crank arms.
- Arm profile is also more dent resistant!
- Hollow 22mm axle is stiffer and stronger than the previous generation 19mm axle.
- BB axle is pressed into the drive-side crank arm for extra strength.
- Flush fit non-drive M15 steel crank bolt helps keep everything in place.
- Dual chainring bolt boss means that either regular or micro drive sprockets can be used.
- Supplied with the 22T Inspired Arcade V2 Integrated Bashring.
- Complete with threaded Euro BB, suitable for 68mm BB shell frames. Custom spacer to allow use with a 73mm BB shell frame now available here.
- Compatible with the Inspired Arcade frame, and may fit other bikes / frames but this would be down to you as we have not specifically tested it with others.
- 175mm arm length only.
- Supplied as a kit including the full crankset with BB and Integrated Bashring!
- Weight: 1.130kg (Complete kit)

Additional Information

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

EU authorised representative

Inspired Bicycles EU
2 Chemin des Frères Garbero,
Bat A3 C3,
Antibes,
06600,
France

Tel: +33761045614
Email: www.inspiredbicycles.com/contact

Technical documents, and product safety certification are available on request, direct from Inspired Bicycles:

Inspired Bicycles
Unit 2,
Gallows Industrial Park,
Furnace Road,
Ilkeston,
Derbyshire,
DE7 5EP,
United Kingdom

Tel: 01159 303603
Email: www.inspiredbicycles.com/contact

Questions

There are currently no questions relating to this product.

Reviews

Not yet rated

People who bought this also bought…

Echo M5 Integrated Chain Tensioner Bolt

Product code: 11606

£1.00

Other Frame Spares

£1.00

£1.00

In stock

In stock

Lizard Skins Danny MacAskill Single Compound Grips

Product code: 13537

£10.00

3 colours available

£10.00

3 colours available

Slip-on version of the Lizard Skins Danny MacAskill grips!
Soft yet durable rubber compound.

£10.00

Inspired Pro Pedals

Product code: 14064

£50.00

Platform Pedals

£50.00

Great value pedals from inspired!
Reaplaceable pins and a tough nylon reinforced body.

£50.00

In stock

In stock

© TartyBikes Ltd, 2025
Tel. (UK). 01772 32 33 33
Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

Company No. 6131482
VAT. GB 860 0270 59

Web Design & Development by tame