- Great quality tubeless rim tape!
- New from Peaty's Products, top quality tubeless rim tape!
- Designed alongside Steve Peat and a selection of top pro riders to be as well suited as possible to the task in hand.
- Flexible but super tough tape can conform to the shape of the inside of your rim without tearing or breaking.
- Tough core allows you to apply the rim tape with plenty of tension, helping to make sure that you get it perfectly applied.
- Great adhesive qualities without leaving your rim covered in sticky gunk when you remove it!
- Supplied in 25mm width, in a 9m roll (suitable for approx. 5 x 26" rims).
- Translucent finish allows you to easily spot the valve hole when you come to pierce the tape and fit your valve.
- Sold as an individual roll.
Tubeless fitting tips from Peaty's:
1 - Remove tyre and any old rim tape
2 - Clean and degrease rim thoroughly (nobody likes a dirty rim!)
3 - Ensure rim is completely dry before application
4 - Starting at least 10cm before the valve hole, Press the tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
5 - Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
6 - Use a small spike to pierce the tape in the centre of the valve hole
7 - Remove dust cap and push valve through the valve hole
8 - Apply lock ring tightly by hand, ensuring there are no air gaps
9 - Refit tyre, add Peaty’s Tubeless Sealant, inflate tyre
10 - Ride!
Does what it’s says on the tin.
Posted by Liam
Very similar to other brands out there I’m using a single wrap which has worked well this far. Be sure to pull the tape tight when fitting as without heat you may see some small bubbles form when pressing down into the rim.
Reply from TartyBikes
Hi Liam - thanks for the review. We're glad the tape has worked out well for you.