• Opening Hours.
    Closed All Day (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Peaty's RimJob Tubeless Rim Tape

Product code: 13956

$15.95

In stock

Peaty's RimJob Tubeless Rim Tape

  • Great quality tubeless rim tape!

- New from Peaty's Products, top quality tubeless rim tape!
- Designed alongside Steve Peat and a selection of top pro riders to be as well suited as possible to the task in hand.
- Flexible but super tough tape can conform to the shape of the inside of your rim without tearing or breaking.
- Tough core allows you to apply the rim tape with plenty of tension, helping to make sure that you get it perfectly applied.
- Great adhesive qualities without leaving your rim covered in sticky gunk when you remove it!
- Supplied in 25mm width, in a 9m roll (suitable for approx. 5 x 26" rims).
- Translucent finish allows you to easily spot the valve hole when you come to pierce the tape and fit your valve.
- Sold as an individual roll.

Tubeless fitting tips from Peaty's:
1 - Remove tyre and any old rim tape
2 - Clean and degrease rim thoroughly (nobody likes a dirty rim!)
3 - Ensure rim is completely dry before application
4 - Starting at least 10cm before the valve hole, Press the tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
5 - Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
6 - Use a small spike to pierce the tape in the centre of the valve hole
7 - Remove dust cap and push valve through the valve hole
8 - Apply lock ring tightly by hand, ensuring there are no air gaps
9 - Refit tyre, add Peatyís Tubeless Sealant, inflate tyre
10 - Ride!

Additional Information

Please note there are currently no trials rims or tyres which are manufactured as tubeless compatible, so the use of this tubless product may not produce a successful result and is at your own risk.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

100%

Based on 1 customer rating

Liam

Does what itís says on the tin.

Posted by Liam

Very similar to other brands out there Iím using a single wrap which has worked well this far. Be sure to pull the tape tight when fitting as without heat you may see some small bubbles form when pressing down into the rim.

Reply from TartyBikes

Hi Liam - thanks for the review. We're glad the tape has worked out well for you.

People who bought this also bought…

Stan Titanium M6 Bolt

Product code: 11936

From £4.25 to £5.50

100%

1 offer available

Spend £50 on Stan products, get 10% off

From £4.25 to £5.50

From £4.25 to £5.50

Check Stock Check Stock

View options

Check Stock

Check Stock

TartyBikes Single Wheelbuild

Product code: 281

£20.00

100%

£20.00

  • Get yourself some custom wheels!
  • Professionally hand built by TartyBikes!

£20.00

In stock In stock

Add to basket

In stock

In stock

Industry Nine Hydra Classic 6B Front

Product code: 13966

£220.00

£220.00

  • Super high quality front hub from Industry Nine.
  • The perfect match for the Hydra Classic Single Speed Rear!

Check Stock

Check Stock

  • © TartyBikes Ltd, 2022
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy