• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

IceToolz Crank Removal Tool

Product code: 11518


In stock

IceToolz Crank Removal Tool

High quality crank puller from IceToolz!

  • Removes ISIS, Octalink & Square Taper cranks!
- Good quality tool-steel crank puller for all modern cranks.
- Free-rotating pip on the end of the tool allows for smooth and easy crank removal.
- Handle-free design means you won't get it stuck right next to the crank arm, and have no leverage (we've all done it!).
- 8mm allen key fitting in the top of the main shaft means no more hunting for that evasive 14mm spanner!
- 'Plug' attached to the end of the tool allows ISIS cranks to be easily removed. However, if you have square taper cranks just remove the plug and it will also work perfectly.
- To avoid damage to your crank threads, please ensure the base of the tool is fully tightened into your crank arm.


Ade Karno

Hi is this a universal crank puller ?

Posted by Ade Karno

Reply from TartyBikes

Hi Ade - That's correct. It comes with the little 'cap' to allow it to be used with ISIS cranks, but you can slip that off to use it with square taper should you need to. Thanks, Mark


Does this crank puller work on all cranks? My bottom bracket at the moment has a very wide diameter, so my MTB puller is too small.

Posted by Alex

Reply from TartyBikes

Hi Alex - It sounds like you may be using a square taper puller on an ISIS BB - this IceToolz model comes with a little plug that fits on the end of the push-rod which means you're able to use this with almost all types of ISIS BB. Thanks, Mark


Write a review


Based on 5 customer ratings


A handy wee tool

Posted by Adam

I think while this tool is handy, I did have a bit of trouble with it, I got my non drive side crank out but because there was a small problem with the thread in my crank (no fault of the tool). So unfortunately I couldn't use it to get my crank out, Overall though a decent tool. To get a crank out with a damaged thread out, I'd recommend a crank puller.

Reply from TartyBikes

Hi Adam - As you mentioned, for any cranks with damaged extractor threads the external puller style tools are a better solution. However, for cranks with undamaged threads the IceToolz Puller is hard to beat in our experience. Thanks for the review!


does the job

Posted by Bazz

Mint tool, works really well. Good quality and fits 2 sizes!

Reply from TartyBikes

Hi Bazz - These tools are pretty handy! We use them in our workshop and they've put up with many years of use. Thanks for the review!


Great tool

Posted by Jack

Simple design that is very handy for removing tough cranks, really good tool to have!

Reply from TartyBikes

Hi Jack - I'd certainly agree. Much better than having to rely on just hammering cranks off! Thanks for the review.


Very good

Posted by Andrea

Useful and easy to use.

Reply from TartyBikes

Hi Andrea - A good crank puller is a handy tool to have. Thanks for the review!

People who bought this also bought…

Comas Snail Cams

Product code: 13595



  • Unique slot adjustment!


On order On order

Stock reminder

On order

On order

Shimano UN-26 Square Taper

Product code: 11704




In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2019
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough