Based on 7 customer ratings
Decent for the money
Posted by Daniel on 19/04/2011
I needed a new headset for my Onza comp 2010 frame and was a little low on cash so opted for this. My initial impressions were that it was very light! I installed it very easily, and the bearings seems very very smooth, even for an un sealed bearing system.
Good
Posted by James on 06/06/2011
Needed a cheap headset to get me by on my Fourplay build until I could save for a Hope or Echo. Don't think I will bother. This one seems fine! James
smooth
Posted by Maciej on 13/09/2011
When my headset kept coming loose and my forks were shaking I bought this one and I am very happy with it, it is pretty easy to install on your own. When fitted to the frame it looks amazing :) It runs so smooth aswell. I would recommend to anyone as this is a cheap and very very good headset:)
Reply from TartyBikes on 14/09/2011
Hello - Although they're pretty cheap these headsets do seem to perform well. As long as you make sure they're greased and aren't ridden loose, they should last a good length of time. Thanks for the review!
Awesome budget headset
Posted by Adam on 06/10/2011
Nice budget headset that does the job, at a really good price. Easy to install and maintain and the quality (upon first impressions, at least...) seems to be pretty good. Would recommend to anyone.
Reply from TartyBikes on 07/10/2011
Hi Adam - This was one of our most popular headsets we sold for quite a while for the reasons you mentioned - as long as you keep on top of any maintenance it requires it should last you a long time. Thanks for the review!
Headset
Posted by Mike on 14/06/2012
Great headset for the money, really smooth and would recommend to anyone.
Reply from TartyBikes on 15/06/2012
Hi Mike - I'm glad you're pleased with the headset! Thanks for the review.
Headrock :/
Posted by Perry on 11/01/2013
Hey guys This may sound stupid but i just keep getting headrock, i tighten it up loads and the pinchbolts in the stem but whenever the front wheel lands it gets headrock. Any tricks or tips as to getting rid of it ? Cheers
Reply from TartyBikes on 14/01/2013
Hi Perry - One thing to check would be to make sure that your top cap isn't bottoming out on your steerer tube. This can lead to the top cap bolt feeling like it's been fully tightened up whereas the headset could still actually be loose. It may also be worth double checking your front wheel bearings as well as your front brake - if the wheel bearings are a little loose or you have a front disc brake, this can sometimes give you a slight rocking feeling when you land moves to front wheel. These headsets are very reliable and simple to work on though, so it may be worth stripping it down to check everything is fine, then re-assembling it with plenty of grease and seeing if the problem goes away.
Product code: 12902
£249.00
£249.00
2 colours available
£249.00
Product code: 12381
From £24.99 to £27.99
From £24.99 to £27.99
RRP: £39.00
Save up to 36%
1 colour available
From £24.99 to £27.99
RRP: £39.00
Save up to 36%
In stock
Technical InfoNew to trials? Then check out our product video guides for useful tips and technical advice
FacebookFollow us on Facebook for exclusive deals, promo codes and offers
Need some help?Have a question? No problem, call us on 01772 32 33 33 or get in touch via our contact page.
TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN
All prices listed are inclusive of sales tax at the correct rate for your country
Web Design & Development by Cox Web Design, Loughborough
will this eadset fitt the onza ice or the limey 20
Posted by Ewan on 04/08/2011
Reply from TartyBikes on 05/08/2011
Hi Ewan - This should fit those frames fine. Thanks, Mark
Will this headset fit the onza zoot 2012 frame?
Posted by mike on 18/06/2012
Reply from TartyBikes on 19/06/2012
Hello - This would fit the Zoot frame fine. Thanks, Mark
hi would this fit a onza t-bird if not whitch one would??
Posted by conan on 02/06/2014
Reply from TartyBikes on 03/06/2014
Hi Conan - thanks for your question. Yes, this will fit your bike just fine. Thanks, Flipp.
Would this fit the onza pro?
Posted by Bernardo on 12/10/2014
Reply from TartyBikes on 13/10/2014
Hi Bernardo - yes, this would fit your frame just fine. Thanks, Flipp.
Would this fit monty 221pr
Posted by mak on 30/10/2015
Reply from TartyBikes on 30/10/2015
Hello - This headset should fit your Monty fine. Thanks, Mark
Hi there would this fit a fourplay
Posted by Lochy on 26/04/2017
Reply from TartyBikes on 27/04/2017
Hi Lochy - If you have a 2012 or earlier Fourplay this should fit fine, although any later and you would need a different type. If you'd like to send us a photo of your bike we can check it out for you to make sure. Thanks, Mark
Would this headset fit a MAD Phase 1.2?
Posted by Jake Burlingham on 09/01/2012
Reply from TartyBikes on 10/01/2012
Hi Jake - This should fit your Phase fine. Thanks, Mark
will this headset fit on a echo lite 09 frame ??
Posted by Jordan Jack on 14/10/2011
Reply from TartyBikes on 14/10/2011
Hi Jordan - This should fit fine in that frame. Thanks, Mark
Hi, Will this fit on a 2008 Onza T-Comp? It currently has an internal headset, would it just be a straight swap?
Posted by Dom Capper on 14/02/2013
Reply from TartyBikes on 14/02/2013
Hi Dom - This headset won't fit unfortunately. You can't really mix and match headset types (within a type of headset, e.g. Internal, Standard, Integrated you can mix and match brands, but just not the actual type itself) unfortunately, so you'd need to stick with the Internal Headsets from our website. Thanks, Mark
Hi. Does this item Fit On the Onza Rip ( the version that is Red And White)
Posted by Roy Trajceski on 14/01/2014
Reply from TartyBikes on 15/01/2014
Hi Roy - thanks for your question. Yes, that will fit your frame just fine. Thanks, Flipp.
I've put this in my inspired four play build and it keeps shaking loose after drops etc... What could be the source of the problem? Ive checked that there's a gap between the top of the stem and the steerer and that's not fixed it.. Thanks Harry
Posted by Harry Adair on 20/04/2016
Reply from TartyBikes on 21/04/2016
Hi Harry - Without seeing the bike it's a little tricky to work out. Is there any chance you'd be able to send us some photos of the setup? Ideally, a good photo of the bottom cup/crown race area, and one of the top cup/upper race area if possible. Sending them to TartyBikes@Gmail.com would be the best bet, and we'll do our best to help! Thanks, Mark