• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Shimano UN-26 Square Taper

Product code: 11704

$15.11

In stock

Shimano UN-26 Square Taper

Great value square taper BB from Shimano.

  • 122.5mm axle width
  • 68mm shell width
- Maintenance-free sealed cartridge assembly with extra seal keeps out dirt, mud, and water.
- Adjustment-free installation keeps things nice and easy.
- 122.5mm axle length with 68mm shell available, to fit a variety of setups.
- Supplied without crank bolts (available here).
- Weight: 330g

Questions

Simon Smith

hi would this fit a ddg shooter and I'm using the trial tech square taper cranks

Posted by Simon Smith

Reply from TartyBikes

Hi Simon!
Are you planning on using the Trialtech Sport square taper cranks with a front freewheel or screw-on sprocket setup, or the Trialtech Race square taper crankset with the 4-bolt 22t chainring?
If you can reply back and let us know we'll do our best to help out with your question.

Paul

Hi Would this work with the 2011/12 inspired hex frame Thanks

Posted by Paul

Reply from TartyBikes

Hi Paul!
This should fit the Hex frame, although that will depend to an extent on the cranks you're using. If you're using an MTB-style crankset with 22t chainring this axle might be a bit too short.
If you can let us know more about the setup you'll be running we'll do our best to help.

Josh

Hi Will this work with a czar frame please itís the same frame that Adam use to have back in 2007 who works for Tarty bikes

Posted by Josh

Reply from TartyBikes

Hi Josh!
Unfortunately we don't think this BB will work, sorry. Ideally you would need a 127.5mm or 128mm BB which we don't have available any longer in square taper.

jocelyn

bonjour :j,aurai voulu savoir ci vous avez des filtrage italien 36X24:merci

Posted by jocelyn

Reply from TartyBikes

Hi Jocelyn!
If you're looking for an Italian thread BB we don't have any suitable, sorry!

Radu Steven

Hi i want to know if this bottom bracket can work with the trialstech crankset and if it clears it

Posted by Radu Steven

Reply from TartyBikes

Hello!
As long as you're using the square taper Trialtech Race Crankset this BB will work, although whether it will have enough clearance depends on the frame you're using. If you can let us know we'll do our best to help.

Valium shanley

Just wondering if it will fit a diamondback kabukimono

Posted by Valium shanley

Reply from TartyBikes

Hello!
We don't have much experience with that bike, so to check it might be best to take some measurements from your existing BB/frame.
If you measure across the width of the BB shell in your frame, it would need to be 68mm for this BB to be compatible.
If you measure from one end to the other of your existing BB, that should give you a guide as to whether you'll be able to use this BB too. As long as your existing BB is 122.5mm or under, it will fit. If you have a slightly wider BB (the next width up will generally be 127.5mm) then clearance might be tricky if you were to switch to this particular BB.

Reviews

Write a review

Not yet rated

People who bought this also bought…

IceToolz BB Tool

Product code: 561

£9.50

100%

£9.50

£9.50

In stock In stock

Add to basket

In stock

In stock

Trialtech Chain Tugs (pair)

Product code: 169

£9.00

100%

£9.00

£9.00

In stock In stock

Add to basket

In stock

In stock

IceToolz Chain Whip

Product code: 140

£9.50

£9.50

£9.50

In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2019
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.