• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Halo Single Speed Spacer Kit

Product code: 14261

$17.42

Out of stock

Halo Single Speed Spacer Kit

  • Ideal for use with the latest generation of HG spline S/S hubs, including Hope Pro 5 and Industry Nine Hydra hubs!
  • Perfect for standard HG spline hubs and cranks too!
- Lightweight single speed spacer kit from hub and wheel specialists, Halo!
- Ideal for spacing splined sprockets on HG spline hubs and cranks.
- CNC machined aluminium construction with a durable, anodised black finish.
- A wide range of spacer sizes to allow you to fine tune your chain line / sprocket fit. Included in this kit are:

x2 - 10mm spacer
x2 - 5mm spacer
x2 - 2.5mm spacer
x2 - 1mm spacer


- Ideal for use with Hope Pro 2 / 4 / 5 S/S trials hubs, Industry 9 Hydra S/S hubs and any standard HG free hub!
- Also work well for spacing splined sprockets on the latest generation of HG splined cranks.
- Available in black only.
- Weight: 26.4g for all the spacers!

Additional Information

Please note: We do not recommend using the 1mm spacers against a lockring or at the base of a free hub / crank spline. Due to their size, there is a chance they will deform under high load in these areas. They work best fitted in between two bigger spacers.

You will need a lockring with a total diameter of 38mm to get full contact with the last spacer on a free hub body. Smaller diameter lock rings may not fully contact the last spacer on the free hub, and could cause damage. This is not covered under warranty. We sell compatible Gusset cassette lock rings here and compatible Halo alloy cassette lock rings here.

It's important to ensure that the final spacer overlaps the free hub body with any sprocket used, so the cassette lockring does not 'bottom out' on the free hub before it is tightened to the recommended torque. 1mm overlap is ideal to ensure the lockring thread engages fully when tightened.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Hope Space Doctor Kit V2

Product code: 14345

£10.50

Headset Spares

7 colours available

£10.50

7 colours available

  • New, lighter weight design!
  • Lower overall stack height to suit modern cockpit set-ups.

Check Stock

Check Stock

Inspired Team Alloy Splined Sprocket

Product code: 14272

£36.00

£36.00

  • As used by Inspired Team riders John Langlois, Ben Travis and Jack Heard!
  • Super light weight, strong and durable construction.

£36.00

In stock In stock

Add to basket

In stock

In stock

Hope Pro 5 Trials / SS Rear

Product code: 14186

£230.00

120mm to 135mm Free Hubs

7 colours available

£230.00

7 colours available

  • New pawl and ratchet mechanism with 108 engagement points!
  • Zero drag free hub labyrinth seal
  • Larger diameter free hub end bearing for improved wear life!

Check Stock

Check Stock

  • © TartyBikes Ltd, 2026
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

Tarty Bikes, T/A Inspired Bicycles Ltd, Unit 2 The Gallows, Furnace Road, Ilkeston, DE7 5EP, UK

  • Company No. 06130891
  • VAT. GB 907878771

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy