- Also available in 105mm width to fit Monty frames.
- Super light weight rear hub from Jitsie!
- Unique hub shell profile gradually tapers from a small to large diameter across the width of the hub.
- Hollow aluminium axle and minimal axle bolt washers keep the weight as low as possible.
- To fit 116mm spaced dropouts when used with snail cams.
- Also available in 105mm spacing to fit some Monty frames (M5, Kamel etc).
- 32 spoke hole drilling only.
- Sealed cartridge bearings increase longevity.
- Standard 1.37" x 24tpi thread to accept threaded sprockets and freewheels.
- Available in anodised black or red with laser etched logos.
- Weight: just 100.5g! (plus bolts and washers at 15.5g)
Hub Dimensions
Disc Side:
- Flange Diameter: 31mm
- Centre to Flange: 45mm
Non Disc Side:
- Flange Diameter: 42mm
- Centre to Flange: 34mm
Good product
Posted by Juan
This hub, as opposed to Jitsie front non-disc hub, is durable. Runs great, is lightweight, has plenty of space for threading a sprocket tightly and, in my particular case, Tarty's staff took the effort of sending a spare pair of bolts to match the advertised chrome look as opposed to the stock black bolts the hub came with. This hub needs either snail cams to the sides or a non-included spacer if mounting in a 116mm frame featuring a chain tensioner.
Reply from TartyBikes
Hi Juan - thanks for the review. We're glad that you've had more success with this hub!