• Opening Hours.
    Tue: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Hope CNC Steel Quick Release Skewer (Single)

Product code: 10731


In stock

Hope CNC Steel Quick Release Skewer (Single)

Front Rear
Blue N/A
Orange N/A
Purple N/A
Red N/A
Silver N/A

Sold out

- The ever popular quick release skewer from Hope.
- 100% designed and CNC machined in Lancashire, England.
- Improved lever shape to make opening / closing the QR easier.
- Self lubricating brass bushes will offer smooth clamping performance for years to come.
- Laser engraved logo for maximum durability.
- Steel spindle for ultimate clamping force.
- Available in a range of vibrant colours so you're sure to find the skewers to finish off your colour scheme nicely!
- Weight: 56g (Front), 63g (Rear).


Ben mortimer

Would this fit my trialtech sport disc hub on the front of my inspired?

Posted by Ben mortimer on 14/05/2012

Reply from TartyBikes on 15/05/2012

Hi Ben - This should fit your Trialtech hub fine. Thanks, Mark


Hi, I have the hope pro 2 hub with a straight thru axel configuration (using a suspension fork)... Would this allow me to convert from straight thou axel to quick release? If not, what could I use to accomplish this?

Posted by Joe on 13/08/2014

Reply from TartyBikes on 13/08/2014

Hi Joe - thanks for your question. You would need to replace your current axle adaptors with QR compatible adaptors to use a standard skewer. They are available here: http://www.tartybikes.co.uk/product.php?product_id=11295 Hope that helps. Thanks, Flipp.


hi would this fit my Onza Sealed Disc Front 2012

Posted by harry on 18/11/2014

Reply from TartyBikes on 19/11/2014

Hi Harry - yes, they would fit together just fine. Thanks, Flipp.


Hi would this for on my Echo urban 24"? Thanks

Posted by Nyall on 07/05/2017

Reply from TartyBikes on 08/05/2017

Hi Nyall - It's possible that this skewer would fit your front wheel, but we'd need to know exactly which hub you've got. It's also possible that it would fit your rear wheel, but fewer hubs are likely to be compatible with this. Thanks, Mark


I am guessing this would fit a hope Pro 4 front hub fitted to a ozonys crown fork set? But can you please confirm this? I also wonder if the Hope AM CNC stem would be suitable for this bike? Thanks James

Posted by James on 08/11/2017

Reply from TartyBikes on 08/11/2017

Hi James - This should fit that setup fine. The Hope AM CNC stem would work, although it might be a touch on the low side. Most riders tend to opt for 70mm stems with around 30-35 of rise, or a 80mm x 40 or 90mm x 35 setup. Thanks, Mark


I've just bought a secondhand Jitsie Varial. The last lad has lost a bolt and washer (outer volcano washers) off the front Hub and I was looking to buy replacement ones from you. However, I've just seen the Hope quick release and wondered if this would fit the front hub of the Jitsie? If it does fit, do I need to order any other parts as well? Also, Do you recommend quick release for Trials bikes?? I'm new to trials!

Posted by David on 17/11/2018

Reply from TartyBikes on 19/11/2018

Hi David!
We don't typically recommend using a quick release on trials bikes as they don't hold the wheel as securely as a normal axle bolt and washer. Due to the extra force that trials places through the bike, having things held in place well is worth the slight inconvenience of having to undo the bolts to remove your wheel.
The Axle Bolt Washers you can find here will be suitable for your Jitsie wheels (except the Onza M5 Axle Bolt Kit), and you can find replacement axle bolts here - you'd need M6x20 or M6x25 bolts. If you still have one of the front axle bolts, you can measure that bolt to make sure you get a direct match for it. The length of the bolt is measured from the tip of the threaded section to the underside of the bolt head, just so you know.
If you need any more help, feel free to ask.

gary smith

hi just bought the inspired fourplay pro 24ins would these fit front and rear in black thanks

Posted by gary smith on 31/12/2015

Reply from TartyBikes on 04/01/2016

Hi Gary - The front version would fit on your Fourplay, but I don't think the rear would. The bolt-up rear hub is a better option for trials too as it holds your back wheel in place much more securely than a QR would. Thanks, Mark


Write a review

Not yet rated

People who bought this also bought…

Echo Urban 26"

Product code: 12888


26" Forks

1 colour available


1 colour available

  • 4-Bolt version now uses M6 bolts & clamps!


On order On order

Stock reminder

On order

On order

IceToolz Chain Whip

Product code: 140




In stock In stock

Add to basket

In stock

In stock

Inspired Hanger (Silver)

Product code: 10310





In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough