Magura Barbed Fitting

Opening Hours.
Mon: 9.30am to 5.00pm (UK)
United Kingdom.
01772 32 33 33
International.
0044 1772 32 33 33

Magura Barbed Fitting

Product code: 376

Overview
Questions

Tool box essential!

- Replacement barbed fitting for Magura HS33 hydraulic brakes.
- Fits all colours of hose, easily fitted with a couple of bits of wood and a mallet (a bit of lube helps it slide in too!).
- This item can be re-used a handful of times, providing it is removed from the existing hose carefully. Cutting along the length of your brake hose with a sharp knife, then peeling the fitting out will release it successfully. It goes without saying that caution is important when doing this, and a vice to hold the barbed fitting still is essential.
- Only compatible with nylon rim brake hose, such as Racing Line, Echo, Trialtech and Magura; not with disc brakes (other than very old Magura Julies).
- M6 thread size.

Questions

Ask a question

There are currently no questions relating to this product.

Reviews

Write a review

100%

Based on 1 customer rating

david

excellent

Posted by david

i bought these barbed fittings as i had a old syringe and tubing lying around at home. i then attached the barbs to 2 bits of tubing and screwed one into my 2004 hs33 lever after removing the bleed screw and the other one to the bleed screw of the brake at the wheel end of the system and used the syringe to pump fresh fluid into the system for a cheaper alternative to maguras bleed kit. all in all tarty bikes hi quality service which was speedy and a top notch product