• Opening Hours.
    Closed All Day (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Hope E- Bike Crankset (splined motor axles only!)

Product code: 14338

$201.57

Special order

Hope E- Bike Crankset (splined motor axles only!)

Narrow Offset - 155mm Crank Length
Narrow Offset - 165mm Crank Length
Specialized Offset - 155mm Crank Length
Specialized Offset - 165mm Crank Length
Standard Offset - 155mm Crank Length
Standard Offset - 165mm Crank Length

Special order - usually 3-5 working days.

Sold out

  • Super pimp crank upgrade for your e-bike!
  • Available in a wide range of lengths, and offsets to suit the most popular motor systems.
  • Compatible with ISIS spindle motors only.
- The Hope E-Bike crank set shares design features from the renowned Evo crank set with optimisation for use on the latest e-bike motor systems!
- Designed for maximum ground clearance to help avoid pedal strikes on those technical uphill sections.
- Forged from 7150-series alloy then CNC machined, which saves weight while keeping the cranks incredibly stiff and strong.
- Self extracting crank bolts on both arms for easy fitting and removal.
- Available in all current Hope colours!
- Available in 155mm and 165mm in all offset options.
- Weight: TBC

- Optimised Q-Factor for compatibility with a wide range of frame and motor combinations. Choose from three different offsets for your motor system:

Standard Offset - This crank model is most suitable for Bosch gen 2/4 systems and Yamaha PW-X systems (not compatible with Bosch gen 3 BNI spindle interface).

Narrow Offset - This crank model is most suitable for Brose systems may also be used as a narrow Q-factor option on Bosch systems if there is adequate frame clearance (not compatible with Bosch gen 3 BNI spindle interface).

Specialized Offset - This crank model is most suitable for Specialized Turbo systems using the ISIS mount including: Levo, Kenevo, Vado, Como, Turbo Levo e-bikes. Please note, this model is not suitable for any Levo SL MTN E-Bikes using the Specialized SL 1.1 M30 motor.

- For further information on selecting the right crank for your bike, Hope have created a useful Crank Fitment Diagram as a guide for checking your frame clearance. If you are unsure what crank set is right for your bike, please get in touch before purchasing. These cranks are designed for motors with a spline fitment only.

Additional Information

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 442 in-lbs (50 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy