• Opening Hours.
    Closed All Day (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Inspired Top Cap

Product code: 12040

From £8.33 to £10.00

Check Stock

Inspired Top Cap

Arcade
Fourplay 2014 Onwards
Team / Hex - DISCONTINUED

Sold out

- Replacement Top Cap from Inspired.
- Screw-in design threads directly into the steerer tube.
- Three models available: Team, Fourplay 2014 and Arcade.
- The Team / Hex top cap fits Trialtech Sport, Inspired Team, Inspired Hex, Onza and Viz forks with M18 x 1.0 thread. It will not fit Inspired Fourplay 2014 onwards, Arcade, Console, or unthreaded steerer tubes. 6mm allen key fitting and a 7mm hole allows your front brake cable to be run through your forks.
- The Fourplay 2014 onwards top cap fits only the aluminium Inspired Fourplay 2014 and on forks, with the forged steerer tube which is a thinner wall at the top. This cap has a 6mm allen key fitting and a large machined "D" allows your front brake cable to be run through your forks.
- The Arcade top cap fits only the steel Inspired Arcade and Console forks. 5mm allen key fitting and a large machined "D" allows your front brake cable to be run through your forks. This is custom made specifically for the Arcade/Console forks and will not fit anything else.
- Available in black only.
- Sold singly.

Questions

josh ellis

would i be able to use this on inspired element forks? thanks

Posted by josh ellis on 22/01/2013

Reply from TartyBikes on 23/01/2013

Hi Josh - As standard you wouldn't be able to, although if you have access to an M18 x 1.0 tap you could create a thread in your steerer tube. Alternatively, a local engineering firm should be able to help out. Thanks, Mark

Daniel Grabiec

Would this top cap fit on a trialtech sport 26" fork? Thanks

Posted by Daniel Grabiec on 15/02/2013

Reply from TartyBikes on 15/02/2013

Hi Daniel - This would fit the Trialtech forks fine. Thanks, Mark

chris

Hello, I would like to know if it is possible to increase the size of the hole in which the brake cable feeds through in order to allow for the olive assembly on the end of the cable to fit through the hole so i dont need to always cut off the olive and install a new one every time i want to change my stem. i already have the top cap so i would like to know what you suggest to make the hole larger without damaging the integrity of the cap. Thanks

Posted by chris on 10/10/2013

Reply from TartyBikes on 10/10/2013

Hi Chris - that's something we've never looked into so are not sure if there is enough material there. We would imagine that increasing the hole to a large enough size to fit an olive through would interfere with the allen key fitting so likely not possible. Thanks, Flipp.

Joseph

Would this fit the Onza Comp forks?

Posted by Joseph on 09/01/2014

Reply from TartyBikes on 10/01/2014

Hi Joseph - thanks for your question. This top cap will not work with those forks as their steerer tube is not threaded. For those forks, you would need a regular top cap that uses a star nut and bolt. Hope that helps. Thanks, Flipp.

Chris Wilson

Hi, will this fit the onza Zoot pro frame kit forks thanks

Posted by Chris Wilson on 06/05/2014

Reply from TartyBikes on 07/05/2014

Hi Chris - yes, this will fit those forks just fine. Thanks, Flipp.

jamie williams

Hi guys just wondering what is the thread size of the arcade one? Thanks Jamie

Posted by jamie williams on 04/01/2015

Reply from TartyBikes on 05/01/2015

Hi Jamie - thanks for your question. We are not sure on the thread size, but it is custom made specifically for the Arcade and will not fit anything else. Thanks, Flipp.

Thomas W.

Hello, just wondering what is the thread size of the arcade one? Thanks Thomas

Posted by Thomas W. on 25/08/2017

Reply from TartyBikes on 25/08/2017

Hi Thomas - The Arcade top cap is M25 x 1.5. Thanks, Mark

Alexandru Calta

Hi guys! Which top cap is better suited for my element fork if I choose to remove the star nut and thread it ? (the fork came on the complete 2014 element white bike) The "Team" cap or the "Fourplay 2014" cap? I kind of like the last one because of that D shape cut. Are they both M18?

Posted by Alexandru Calta on 04/12/2014

Reply from TartyBikes on 04/12/2014

Hi Alexandru - thanks for your question. If you are able to put a thread in your steerer you should use the Team top cap. The others two have considerably larger thread diameters and will not be suitable for your forks. Thanks, Flipp.

Craig Mackenzie

Hi just wondering if the arcade one would fit on the inspired flow 20"? Thanks

Posted by Craig Mackenzie on 03/01/2017

Reply from TartyBikes on 04/01/2017

Hi Craig - None of these top caps will fit the Flow 20", sorry. The only other option we stock that will work on the Flow for steerer tube routing would be the Inspired Headlock V2. Thanks, Mark

Lukas Schmid

Hi. Would te Top Cap fit the Inspired Fourplay 2012? Thanks for answear.

Posted by Lukas Schmid on 27/12/2015

Reply from TartyBikes on 29/12/2015

Hi Lukas - As long as you use the "Team" version it should fit fine. Thanks, Mark

Reviews

Write a review

Not yet rated

People who bought this also bought…

Trialtech Sport Lower Tensioner Half

Product code: 12662

£20.00

£20.00

£20.00

In stock In stock

Add to basket

In stock

In stock

Spank Spike Race 33 24"

Product code: 13071

£65.00

£65.00

£65.00

On order On order

Stock reminder

Notice

On order

On order

Hope Pro 4 Trials / SS

Product code: 13104

£170.00

135mm Free Hubs

6 colours available

£170.00

6 colours available

Check Stock

Check Stock

  • © TartyBikes Ltd, 2017
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top