• Opening Hours.
    Closed All Day (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Hope Trial Zone Post Mount No 9 Caliper

Product code: 11824

From $87.44 to $105.85

Check Stock

Hope Trial Zone Post Mount No 9 Caliper

Black IS Number 5 (including all fittings shown)
Black, Post Mount Caliper (With pads)
Blue, Post Mount Caliper (With pads)
Orange, Post Mount Caliper (With pads)
Purple, Post Mount Caliper (With pads)
Red, Post Mount Caliper (With pads)
Silver, Post Mount Caliper (With pads)

Usually 3 - 6 working days.

Sold out

- Replacement Hope Trial Zone brake caliper, compatible with Hope Mini, Tech, Race and Trial Zone levers.
- CNC machined in the UK from 2014 aluminium, and laser etched with a Hope logo.
- Fitted with the same 25mm pistons as the Hope Mono Trial/Tech Trial calipers, giving great power.
- Beefy design helps ensure a stiffer brake feel, but clever CNC machined scoops help remove any excess material.
- Supplied with all fittings allowing easy fitting with any Hope Kevlar hose.
- Available in Post Mount #9 fitment only (#3 & #5 IS calipers are no longer produced). Please note that all Post Mount calipers are now supplied with the latest hose routing / bleed nipple layout, with the bleed nipple on the outside of the caliper (see photo of red caliper).
- Supplied with standard Hope Trial pads and Trial Zone pad retention pin.
- Black & Red are held in stock with other colours available to order.
Number 5 caliper fits:
International Standard fork with 160mm rotor
+20 fork with 180mm rotor
+30 fork with 190mm rotor
International Standard frame with 140mm rotor
+20 frame (Koxx Hydroxx 20 and 26", Koxx Silver Sky) with 160mm rotor
+40 frame (GU LE '09, Simtra ST-1) with 180mm rotor
+50 frame (YaaBaa 1499) with 190mm rotor

- Weight (including all supplied fittings and bolts - which may be supplied in black or silver): Post Mount - 98.1g.

Additional Information

The Tech Stuff - please follow this guide to find out which adaptor you need:

Some frames or forks have the mount at a different position to standard, such as "Plus 20" on the rear of many Inspired frames, or 180 Post Mounts on a lot of modern MTBs, so please follow the guide below to ensure you order the correct item.

First, identify which type of frame or fork you have - IS (International Standard) or PM (Post Mount). IS mounts have 'sideways' installed bolts, in the same orientation as your hub axle. The PM system uses radially mounted bolts, roughly in the same orientation as your spokes.

Then, measure from the centre of your hub axle to the centre of the nearest caliper mounting hole if you have an IS mount, or the top centre (where the bolt screws in) of the nearest mounting hole if you have PM. This will tell you which disc mount position you have:

160 PM fork = 55mm
180 PM fork = 65mm
IS Fork = 50mm
+20 IS Fork = 60mm

160 PM frame = 55mm
180 PM frame = 65mm
IS frame = 40mm
+20 IS frame = 50mm

Then, find your rotor size below and read off which adaptor you need:

160mm front rotor with:
160 Post Mount fork = No adaptor
180 Post Mount fork = Not possible
IS fork = Adaptor A
+20 IS fork = Not possible

180mm front rotor with:
160 Post Mount fork = Adaptor L
180 Post Mount fork = No adaptor
IS fork = Adaptor F
+20 IS fork = Adaptor A

200mm front rotor with:
160 Post Mount fork = Adaptor C
180 Post Mount fork = Adaptor L
IS fork = Adaptor N
+20 IS fork = Adaptor F

203mm front rotor with:
160 Post Mount fork = Adaptor C
180 Post Mount fork = Adaptor H
IS fork = Adaptor B
+20 IS fork = Adaptor J

160mm rear rotor with:
160 Post Mount frame = No adaptor
180 Post Mount frame = Not possible
IS frame = Adaptor F
+20 IS frame = Adaptor A

180mm rear rotor with:
160 Post Mount frame = Adaptor L
180 Post Mount frame = No adaptor
IS frame = Adaptor N
+20 IS frame = Adaptor F

200mm rear rotor with:
160 Post Mount frame = Adaptor M
180 Post Mount frame = Adaptor L
IS frame = Not possible using items we sell, and not recommended as it is highly likely to break your frame
+20 IS frame = Adaptor B

203mm rear rotor with:
160 Post Mount frame = Adaptor C
180 Post Mount frame = Adaptor H
IS frame = Not possible using items we sell, and not recommended as it is highly likely to break your frame
+20 IS frame = Adaptor B

If you still aren't sure which one you need (appreciate it is a bit of a minefield!), please feel free to contact us for advice.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

100%

Based on 1 customer rating

ushishu

Japanese street trial

Posted by ushishu

I use a combination of "Tech3 master cylinders" and the Trial zone calipers. No problem. I want to use the trial ride in single track or street.

People who bought this also bought…

Hope Space Doctor Kit

Product code: 10159

£10.00

100%

Headset Spares

6 colours available

£10.00

6 colours available

£10.00

In stock In stock

View options

In stock

In stock

TartyBikes Alloy Valve Caps (Pair)

Product code: 13018

£4.00

100%

Trinkets

6 colours available

£4.00

6 colours available

  • Our very own pimp valve caps!
  • Add a splash of colour to your bike.

Check Stock

Check Stock

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008

£0.50

100%

Stickers

3 colours available

£0.50

3 colours available

  • Now available in shiny Chrome Red finish!

£0.50

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2021
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie perferences below. For futher information please read our cookie policy