• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Hope Trial Zone V2

Product code: 13108

From $43.16 to $49.80RRP: $43.16 to $49.80(Save up to 5%)

In stock

Hope Trial Zone V2

160mm (Inc rotor bolts)
180mm (Inc rotor bolts)
200mm (Inc rotor bolts)
200mm (Inc USED rotor bolts)

Sold out

  • The recommended rotor for all Hope Trials brakes!
  • Gives excellent power, bite and modulation.
  • Also a great upgrade if you have Echo Disc Brakes!
- Hope's latest Trial Zone rotor, building on their tried and tested previous design, the V2 rotors feature straighter 'arms' for improved strength and stiffness as well as a change to the braking area to offer better hold.
- Wavy outer edge improves hold, while multiple holes in the braking surface improve both bite and wet weather performance.
- Large bandwidth works perfectly with the bigger pistons found in the Trial Zone calipers.
- Standard IS 6-bolt fitting.
- 6 x T25 rotor bolts included, unless stated.
- Available in 160mm, 180mm and 200mm sizes.
- Weight (plus 6 mounting bolts at 12.6g) - 160mm: 100.9g. 180mm: 125.9g. 200mm: 161.3g.

Additional Information

Please note: The product 200mm (Inc USED rotor bolts) was test fitted to a bike, hence the rotor bolts have been installed, and removed from a hub, so the blue thread locking compound on the bolts is no longer 'new'. The rotor has not been used, nor the bike ridden with the rotor fitted. The discount on the product reflects this.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

100%

Based on 3 customer ratings

Chakers1998

Great Rotors

Posted by Chakers1998

Running these with Trial Zones and they are fantastic. Initially went from 180 to 200 as my brakes weren't working as well as I'd like. Rebuilt the brakes and now I've gone back to 180 as the 200's are not really necessary, plus there is more chance of hitting one. These rotors are absolutely savage with Jitsie pads.

Reply from TartyBikes

Thanks for the great review! The Trial Zone Rotors work exceptionally well with the Jitsie Trials pads. They're a perfect match for the Trial calipers that use a brake pad with a bigger surface. Combining the two certainly gives buckets of power!

Archie

Very good

Posted by Archie

I upgraded to 200mm from 180mm and went from the old rotor style to the new one at the same time so i'm not sure what was playing a bigger part. Either way there is noticeable power over my old set up after bedding in the brakes. Still great modulation though alongside the power which is great. However, i had a couple of problems. Firstly these are quite expensive, which to be fair you can expect from a new product, hopefully the price will drop down at some point. Secondly, when i fist put on the rotors, i got a bit of rub on the caliper . I contacted tartybikes and they reassured me that there was no problem, just the rotor wads sightly bent. They sent a video about straightening the rotor and gave a few tips, and i got the problem sorted. Cheers guys! The only other thing is personally, i think the old rotor looked a lot better, this one is still pretty cool though.

Reply from TartyBikes

Hi Archie - Thanks for the detailed review. I'm glad you like your new rotor! The V2 does look different to the V1, but that's for functional reasons. The V1 rotor had longer arms which introduced more flex into the rotor, whereas the shorter, straighter arms for the V2 improve brake performance. Hopefully that makes sense. Thanks again for the review, it's good to hear your brake is working better now.

Seth

Nice Stiff Rotor

Posted by Seth

I purchased this rotor in the 180mm size along with new Jitsie Hope pads for my 24" bike. After a few minutes of dragging the brake, the pads and rotor were bedded in and working GREAT! This rotor is a bit more stiff than my stock 160mm Hope Mono rotor, with better bite and hold. Give this rotor a try and load up some new Jitsie pads at the same time. You won't regret it! Thanks Tartybikes!

Reply from TartyBikes

Hi Seth - Thanks for the feedback on your new rotor. It's good to get some more insight about the V2 rotors out in the wild!

People who bought this also bought…

TartyBikes Axle Bolt Washers (pair)

Product code: 14072

£4.00

£4.00

£4.00

In stock In stock

Add to basket

In stock

In stock

Magura Olives

Product code: 28

From £2.50 to £18.00

100%

From £2.50 to £18.00

  • Quantity rate discounts available!
  • Tool box essential!

From £2.50 to £18.00

In stock In stock

View options

In stock

In stock

Avid Olive (Single)

Product code: 12407

£1.50

£1.50

£1.50

In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy