• Opening Hours.
    Fri: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

#Hashtagg 135 Screw On

Product code: 13772

$75.61

Out of stock

#Hashtagg 135 Screw On

  • Top quality sealed bearing, high engagement freewheel.

- Sealed bearing 135 engagement point freewheel from #Hashtagg.
- 135 engagement points are achieved by using 3 offset groups of 3 pawls into a 45 tooth ratchet.
- Each pawl is actuated with an individual spring, giving precise, reliable engagement.
- Dual sealed bearing design gives great driveshell stability, as well as allowing a unique design that requires no lockring (the bearings are held in place using an external circlip), helping to save weight. Please note that this produces more 'drag' than a regular single speed freewheel.
- The freewheel width is kept to a minimum to by using BB-style removal tabs - this means the freewheel can be removed with a Shimano-style 20 spline bottom bracket tool.
- #Hashtagg graphics on the drive shell look great.
- Please note: You must use a freewheel spacer between the freewheel and the bashring (or crank arm if you aren't using a bashring), unless you are using a bashring with a wider section/lip at the base.
- 1.37" x 24tpi thread fits almost all hubs and cranks.
- Available in 18t only.
- Weight: 175g (18t)

Freewheel width: 18.90mm

This freewheel must be bedded in before trials use, to ensure any excess grease used when assembling the freewheel works away from the mechanism. You can do this by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use without having been bedded in, the pawls will not engage correctly and this causes the freewheel to skip, damaging the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.

Additional Information

Please note that this freewheel MUST be bedded in with 'normal' riding before trials use. We also recommend thinning out the grease inside this freewheel after the bedding in period, since the sealed bearings will expel any excess grease when new and this will enter the pawl mechanism.

Freewheel sound level:

All freewheels tested under similar conditions. Please note that the sound level of a freewheel may change after bedding in. A 10 dB increase in sound level is approximately equivalent to double the perceived volume.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

KMC Z1eHX

Product code: 10508

From £12.00 to £15.00

100%

From £12.00 to £15.00

  • New design, same great performance!
  • Proven 'HX' Heavy Duty design.
  • Huge 1370kg load capacity.

From £12.00 to £15.00

Check Stock Check Stock

View options

Check Stock

Check Stock

TartyBikes V4 Chainstay Protector

Product code: 12485

£4.50

100%

Chainstay Protectors

4 colours available

£4.50

4 colours available

  • New sizing, available in 4 colours!
  • Wide range of compatibility, from the steel Inspired Arcade up to the widest alloy trials frames!
  • Double stitched velcro ensures maximum life!

£4.50

In stock In stock

View options

In stock

In stock

Comas Bashring

Product code: 13594

£24.00

£24.00

£24.00

Out of stock Out of stock

Stock reminder

Out of stock

Out of stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy