Replacement bearings to fit hubs, headsets and bottom brackets!
Please note: Bearing seal colour may vary from those pictured.
- High quality, steel replacement bearings!
- Two rubber seals for durability and improved service life.
- Sizes available to fit a wide range of bike components!
- High quality replacement bearings for the high load areas of your bike!
- All bearings use steel races and ball bearings for increased durability.
- Two rubber seals on each bearing to prevent water ingress and retain grease.
- Bearings to fit a wide range of hubs, bottom brackets and headsets!
-
All bearings sold singly unless otherwise stated.
-
Please see product photographs for images of the bearings with their codes and sizes.
Sizes available:
-
6000 - 26mm (OD) x 10mm (ID) x 7.9mm (width), to fit:
- Sport Lite 116mm Rear Disc (both sides)
- Sport Lite 116mm Rear Non-Disc (non-drive side)
- Sport Lite 135mm Rear Non-Disc (non-drive side)
- M30 116mm Rear hub (drive side)
- M30 135mm Rear hub (drive side)
-
6900 - 22mm (OD) x 10mm (ID) x 6mm (width), to fit:
- Sport Lite Front Disc (both sides)
- M30 116mm Rear hub (non-drive side)
- M30 135mm Rear hub (non-drive side)
-
6902 - 28mm (OD) x 15mm (ID) x 7mm (width), to fit:
- Sport Lite 116mm Rear Non-Disc (drive side)
- Sport Lite 135mm Rear Non-Disc (drive side)
-
6802 - 24mm (OD) x 15mm (ID) x 5mm (width), to fit:
- Crewkerz WAW HS Rear (drive side / non-drive side)
-
6094 - Spanish - PACK OF TWO - 37mm (OD) x 22mm (ID) x 9mm (width), to fit:
- Trialtech Sport Press-Fit Spanish Style Isis BB
- Echo Urban Isis BB
-
6806 - ABEC 3 - 41.9mm (OD) x 29.9mm (ID) x 6.9mm (width), to fit:
- For use with AS30 or BB30 bottom brackets from Clean, Hashtagg, Try-All and Crewkerz.
-
Lower Headset Bearing - 52mm (OD) x 40mm (ID) x 8mm (width), Race angle of 45° / 45° to fit:
- 1.5" Lower internal headset bearing cups from Clean, Crewkerz and others.
-
Upper Headset Bearing - 41mm (OD) x 30mm (ID) x 8mm (width), Race angle of 45° / 45° to fit:
- 1-1/8" Upper internal headset bearing cups from Clean, Crewkerz and others.
-
Upper Headset Bearing (2023+ Inspired Hex, Fouplay, Link), OD/ 41.8mm - ID/ 30.5mm - Width/ 8mm - Race angle 36° / 45°
-
Upper Headset Bearing (Clean K1 / K1.2 integral), OD/ 41mm - ID/ 30.15mm - Width/ 6.5mm - Race angle 45° / 45°
-
Lower Headset Bearing (2023+ Inspired Hex, Fouplay, Link), OD/ 45.8mm - ID/ 40mm - Width/ 8mm - Race angle 45° / 36°
In stock
Technical Info
Facebook
Need some help?
