• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Inspired Team V2 26"

Product code: 13380


In stock

Inspired Team V2 26"

  • Stiff, tough yet lightweight!
  • Available in: 32h only
- Inspired's Team V2 26" rims - the bigger brother of the 24" rims as tested by team riders Aaron Browne, Ali Clarkson, John Langlois and Leo Nobile!
- Featuring an all-new custom extrusion that is much deeper than the previous Team rim to give un-rivalled stiffness.
- High grade alloy construction improves durability.
- Unique inner wall profile helps promote stiffness.
- Rather than being pinned like most rims, the Inspired Team V2 rims are sleeved. The rim is connected and held together by an alloy sleeve rather than being welded or pinned, thus minimising any possible stress risers in this area.
- To help make seating your tyre a little easier, we recommend using a narrower rim tape (or simply a strip of insulating tape or similar) to avoid your tyre coming into contact with the edge of the rim tape.
- 34mm wide to give a good compromise of width for tyre stability, but a low overall weight.
- Tough anodised black finish with three laser etched Inspired logos on each side of the rim.
- Available in 32h drilling only.
- Weight: 465g
- ERD: 527mm



hi, would this rim be suitable for mountain biking and would they work front and rear as they are listed in "front rims" ?

Posted by Jay

Reply from TartyBikes

Hi Jay!
One of the guys in the office here runs the Team V2 rims front and rear on his mountain bike, and we've had other customers do the same in the past too.
They're fine for use on either the front or rear - they're just listed in the 'front' category here as they're relatively narrow compared to most of the rims we stock for the use on the back of trials bikes (they tend to be nearer 47-48mm wide). They are fitted as standard front and rear to the Inspired Hex Team bikes, and Inspired's pro riders have definitely put them through their paces!
If you have any more questions, feel free to ask.


Hi Tartybikes! Does this rim's quoted 34mm refer to the inner or outer width? Thanks! Michael

Posted by Michael

Reply from TartyBikes

Hi Michael!
All of our width measurements refer to the outside of the rim.


Write a review

Not yet rated

  • © TartyBikes Ltd, 2019
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough


Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.