#Hashtagg Carbon 20" Forks

They're back! The Hashtagg straight steerer carbon 20" forks.

HS brake mount option now available!

Ideal upgrade for frames that require a 1-1/8" fork steerer!

- Ultra lightweight carbon fibre forks from #Hashtagg!
- Constructed from unidirectional carbon fibre, with an aluminium insert to support the steerer tube for extra strength.
- Unique leg profile gives a good blend of strength and stiffness.
- V-shaped reinforcing section underneath the crown improves leg stiffness.
- Post mount disc brake option designed for use with a 160mm rotor, no adaptor needed!
- HS mount option, designed for use with standard 46mm spaced HS clamps. Approximate HS mounting post height of 10.5mm. - 10mm thick dropouts are spaced at 100mm to be compatible with almost all hubs.
- The steerer insert also features an M6 threaded section, removing the need for a star nut. This threaded section starts 45mm below the top of the steerer tube, allowing space to trim the steerer if required.
- Integrated crown race system - run your headset bearing directly onto the fork without using the crown race (requires sealed cartridge bearing headset), whether you are using a 1 1/8" or 1.5" lower headset cup.
- Embossed "#" logo on the arch connecting the two legs beneath the crown.
- Large, white graphics boldly stand out against the black carbon finish.
- Weight: 503g (Post mount option) / 510g (HS mount option)

Fork Dimensions
- Axle to Crown length: 365mm
- Axle Offset: 42mm
- Steerer tube length: 200mm