• Opening Hours.
    Wed: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Clean X2 Alloy Tapered 20"

Product code: 13182

From £91.66 to £115.83RRP: £115.83(Save up to 21%)

In stock

Clean X2 Alloy Tapered 20"

4-Bolt Only
Post Mount Only
Post Mount, fitted but unused, pre cut steerer tube

Sold out

- New from Abel Mustieles' brand Clean, Alloy Tapered 20" forks!
- Constructed from high grade aluminium alloy to give a great strength to weight ratio.
- Super thick tapered steerer tube ensures the forks have the longest lifespan possible, whilst internal butting helps keep weight as low as possible.
- Over-sized crown area of the fork provides great weld contact area for the fork legs, giving more strength at this key area.
- Integrated crown race means that the lower headset bearing can be run directly on the fork crown.
- Suitable for use with either tapered head tube frames, or internal head tube 1 1/8" frames used with a Hope Type H Lower Headset Cup.
- Available in either 4-Bolt Only or Post Mount Only options.
- CNC-machined 4-bolt brake mounts (spaced at 95mm) have integrated booster plates to help dissipate the stresses put through the brake mounts, in turn helping prolong the fork's lifespan.
- Dedicated CNC-machined Post Mount is positioned to allow the use of a 160mm rotor with no additional adaptors required.
- Chunky dropouts have their welds connecting them to the fork smoothed off to limit the chances of cracking. Please note: Due to the thickness of the dropout, it is important to check that you have suitable thread contact within the axle to support your axle bolt. We recommend a minimum bolt length of 25mm is used.
- Tough anodised black finish is complimented by Clean's latest water transfer graphics.
- Fork supplied with large star nut.
- Weight - 4-Bolt Only: 910g. Post Mount Only: 893g.

Fork Dimensions

- Axle to Crown length: 370mm
- Axle Offset: 30mm
- Steerer tube length: 190mm (on the pre cut forks 180mm at the front and 162mm at the back).

Additional Information

Please note that due to the design limitations of 4-Bolt forks, they are always less durable than the same model without the 4-Bolt mount fitted. The stiff section where the mount is located causes a stress riser, and this makes the fork more likely to break. We therefore advise that forks fitted with a 4-Bolt brake mount will always fail earlier than the same fork without this mount attached. Forks are supplied with a limited 6 month warranty covering manufacturing and materials defects (not crash damage).

Questions

Dean Hawken

Is the star nut fitted on these forks when you buy or do we need to book workshop time to fit?

Posted by Dean Hawken on 08/09/2017

Reply from TartyBikes on 11/09/2017

Hi Dean - The starnut is pre-fitted. Thanks, Mark

Reviews

Write a review

Not yet rated

People who bought this also bought…

Monty BikeTrial 19'' x 2.7"

Product code: 2079

£27.00

100%

£27.00

£27.00

In stock In stock

Add to basket

In stock

In stock

Echo Urban 2017 20"

Product code: 12886

£89.00

20" Forks

1 colour available

£89.00

1 colour available

£89.00

On order On order

Stock reminder

On order

On order

Hope F20

Product code: 11965

£114.99

Platform Pedals

6 colours available

£114.99

RRP: £120.00

Save 4%

6 colours available

£114.99

RRP: £120.00

Save 4%

Check Stock Check Stock

View options

Check Stock

Check Stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top