• Opening Hours.
    Tue: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Hope Pro 2 / Pro 4 Trials Axle

Product code: 10778


Check Stock

Hope Pro 2 / Pro 4 Trials Axle

10mm, Pro 2 - HUB218S
10mm, Pro 2 Evo - HUB236S
10mm, Pro 4 - HUB1009-50S
12mm Thru, Pro 2 Evo, Steel (HUB1007-3)
12mm Thru, Pro 4 - HUB1009-49S

Sold out

- Replacement 2014 T6 aluminium axle to fit Hope Pro 2, Pro 2 Evo or Pro 4 Trials hub.
- Various models available: 12mm through axle for Skye and Crewkerz bikes, HUB218 to fit 10mm bolts (fits non-Evo version of the hub, with 15mm diameter at both ends where the end caps fit on), HUB236 to fit 10mm bolts (fits Evo version of the hub, with 15mm diameter at the drive side end and 17mm diameter at the non drive side end), and a Pro 4 version (plain 17mm diameter on the drive side, 17mm on the non drive side - 10mm bolt in version HUB1009-50S, 12mm through axle version HUB1009-49S).
- Ideal to replace any broken or stripped axles.
- Simple fitting with a mallet and a couple of bits of soft wood.
- Bolt-in version is designed for M10 male bolts, so axle is internally threaded.
- Now also available as a 12mm Through Axle model, suitable for use in the Inspired Skye rear hub, and as a conversion for any 12mm bolt through frames such as the Crewkerz Cleep.
- Sold singly.
- Weight: 46g (alloy), 99.0g (steel)


chris loddington

Hi :) will this fit on the normal Pro 2 hub? Thanks, Chris

Posted by chris loddington on 11/01/2011

Reply from TartyBikes on 12/01/2011

Hi Chris - Unfortunately, this axle isn't compatible with the regular Pro 2 hub. Thanks, Mark


Hi! Is the 135x12 thru axle compatible with Pro 2 Trials EVO?

Posted by Vladimir on 12/02/2013

Reply from TartyBikes on 12/02/2013

Hi Vladimir - The 12mm axle is only compatible with the hub fitted to the rear of the Inspired Skye. If you have a 'normal' hub (e.g. Hope Pro 2 Trials, Hope Pro 2 Evo Trials) then it will not fit, sorry. You will need the 10mm version. Thanks, Mark


Hello, I have an Hope Pro 2 Evo Hub 15mm thru axle. However I don't have the axle for this hub. What will work for this application? Thanks!!!!

Posted by Sebastian on 27/11/2013

Reply from TartyBikes on 28/11/2013

Hi Sebastian - thanks for your question. We're a little confused as to what you mean. Do you mean a front or rear hub? If you email us with a bit more detail about what you have and what you want to do we might be better able to help you. Some pictures of the hub you have might help clarify things a little too. Thanks, Flipp.


Hi guys! I'm not sure if already answered this, because there was a question where you recommended a 10mm axle, but will the steel 135x12mm axle work on a Hope Pro 2 Evo Trials on a Crewkerz? Is the aluminum one the same just different material? Thanks!

Posted by Albert on 06/03/2016

Reply from TartyBikes on 07/03/2016

Hi Albert - The Steel 12mm through axle uses the same design/dimensions as the Alloy 12mm version so is a direct replacement, but is much stronger. Thanks, Mark


Hey. I have a hope pro 2 trials/ss hub. I'm in need of a replacement axle. I believe I need the 10mm bolt in for the non-evo hub (hub218) can you confirm this? Thankyou!

Posted by Kieran on 14/08/2017

Reply from TartyBikes on 15/08/2017

Hi Kieran - If it's the old/original Pro 2 Trials hub, prior to the introduction of the Evo model, then HUB218 should do the trick for you. Thanks, Mark


Hi, I have both a Pro 2 Trials and a Pro 2 Evo Trials and want to convert one of them to 135x12mm maxle. Could you tell me a. if it's possible, and b. which axle for either one I'd need? Thanks a bunch!

Posted by Josh on 21/08/2017

Reply from TartyBikes on 21/08/2017

Hi Josh - Unfortunately, we're no longer able to get hold of axles to suit the Pro 2 hub. We stock axles for the Pro 2 Evo Trials hub though, and they're listed on our website. The correct axle is part no. HUB1007-3. You would need new axle end caps too, unless you just drill or file your existing ones out to 12mm. Thanks, Mark


I have a Pro 4 SS hub in a 135mm spacing with bolts. Can I convert it to a 142mm hub? I read on MTBR.com I could do so by using the HUB242 end caps and HUB1007-3 axle?

Posted by Gary on 16/02/2018

Reply from TartyBikes on 16/02/2018

Hi Gary - If you've got a Pro 2 Evo hub that setup should work, but if it's the Pro 4 Trials/SS hub then those won't be compatible sorry. You'd need the Pro 4 HUB1009-49S axle, although the HUB242 caps should work with it. Thanks, Mark


Hi guys is there a 12mm thru axle option for the older Pro 2 trials hub?

Posted by Scott on 04/07/2018

Reply from TartyBikes on 04/07/2018

Hi Scott - Unfortunately that option isn't available, sorry. Thanks, Mark

victor albach

Hi ! What axle I should take for the Hope Pro 2 Trials EVO, 32h? What size ? I have an Inspired Fourplay Team 2012. Thanks.

Posted by victor albach on 04/10/2015

Reply from TartyBikes on 05/10/2015

Hi Victor - It sounds like you would need the 10mm EVO - Alloy - HUB236 - 38D option. Thanks, Mark

Rory Semple

I have the original hope pro 2 hub and the thread on one side has been stripped. I am just wondering exactly which version of this to order? Cheers guys!

Posted by Rory Semple on 23/09/2017

Reply from TartyBikes on 26/09/2017

Hi Rory - Unfortunately, axles for the original Pro 2 Trials hubs are no longer available from Hope. Your best bet would be to speak to any local engineers/machinists and see if they could machine one for you. They're relatively simple to make so it shouldn't be too difficult or cost too much. Sorry we can't be more help! Thanks, Mark


Write a review


Based on 1 customer rating


Brilliant service!

Posted by Rory on 02/10/2017

After phoning Tarty Bikes to see if it was possible to get an axle for the original PRO 2 , They were able to order the right axle in from Hope and still have it delivered to me within a few days! This was brilliant as it went I could then go on a group ride in Glasgow and had no issues. Thanks Guys

Reply from TartyBikes on 03/10/2017

Thanks Rory - it was no trouble at all. Glad you were able to get out riding again quickly!

People who bought this also bought…

Hope HUB301 Needle Roller Bearing

Product code: 13316




In stock In stock

Add to basket

In stock

In stock

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008





In stock In stock

View options

In stock

In stock

Hope Pro 2 / Pro 3 / Pro 4 Pawl

Product code: 545




In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough