This bike is built in our workshop before dispatch, and we often have a queue. The current lead time can be seen by adding this bike to your basket. Some basic assembly is required on arrival, we are happy to help if you need.
Cane Creek eeWings crank set option now available to special order! Please see product photos for detailed images of the new cranks fitted to the 2023 Fourplay Team.
Industry Nine Hydra Hub Upgrade now available for the Fourplay Team on all special order bikes! Available to select at the basket page when you choose your Fourplay Team.
- New updated geometry for 2023!
- Fully integrated headset bearings.
- New improved Team sprung tensioner!
Need help working out which Inspired bike is best for you? Check out our Buyer's Guide here for all the info you'll need!
-The new Fourplay Team from Inspired has been given a long awaited overhaul. Developed with feedback from team riders Ben Travis and John Langlois has resulted in new geometry featuring a shorter wheelbase, steeper head angle and slightly higher BB making the Fourplay even more capable and agile for the most demanding street riders!
-
New Cane Creek eeWings crank set option now available to special order. Extensively tested by Inspired team riders, the eeWings cranks have proven to be a super light, and strong crank option for trials use with a 10 year warranty! Supplied with a custom, individually numbered, integrated bash ring designed to fit perfectly with an integral axle spacer. Cane Creek's own Hellbender 70, sealed bottom bracket finishes off this ultimate drive train set up. Total weight for the cranks, BB and custom bash rings is only 576g!
Please note The Cane Creek eeWings cranks are
ONLY supplied on complete bikes and cannot be purchased separately.
- New head tube design now features fully integrated headset bearings for a cleaner front end whilst saving weight.
- The new Trialtech Team chain tensioner has been completely redesigned and now uses an integrated bracket, smaller spring with an additional thumb rest making removing the chain much easier. The more minimal design saves weight and tucks the tensioner further up into the chain stay. Chain wrap has been massively improved, with the new tensioner offering the most chain wrap we've seen from a sprung tensioner!
- Top cap design screws into the threaded steerer tube and allows the hose to be routed through the steerer if required. We can send the bikes with the hose through the steerer if you like, please also purchase the correct brake model option of this
Workshop Item if you would like the hose to be routed through the steerer.
If you do not add this item, the bike will be sent with the hose NOT routed through the steerer as shown in the pictures.
- High quality 6066 aluminium tube set includes double butted top and down tubes to save weight.
- Completely re-designed dropout is forged from high grade aluminium, as featured on the Skye Team V3 frame.
- Featuring a 12mm rear through axle, as well as 180mm position Post Mount disc mount.
- Revised toptube and seatstay joints for improved strength.
- Hope Pro 4 hubs offer rock solid, silky smooth, dependable rolling and drive, and the rear is the latest generation Trials/SS model, offering 88 engagements per revolution! (This works out at 121 engagements per crank revolution with the featured 22:16 gear ratio.)
- Tapered fork steerer tube is made from 7075 aluminium and is both lighter and stronger than previous models.
Frame and Forks
- Frame: Inspired Fourplay, 12mm through axle, Post Mount disc mount
- Forks: Inspired Tapered Team, 20mm through axle, Post Mount disc mount
Wheels
- Front Hub: Hope Pro 4, 32h
- Rear Hub: Hope Pro 4 Trials, 32h
- Chain Tensioner: Trialtech Team Single Sided Sprung
- Front Rim: Inspired Team V2 (tubeless ready), 32h
- Rear Rim: Inspired Team V2 (tubeless ready), 32h
- Spokes: Sapim Race DB
- Rim Tapes: Trialtech, Black
- Inner Tubes: Maxxis (may be branded Cheng Shin, this is the same company as Maxxis)
- Tyres: Continental Danny MacAskill Air King, 24 x 2.4"
OR
Industry Nine Hydra Hub Upgrade
Brakes
The bike is available with various brake options, listed above. The brake option includes 180mm rotors of matching brand, the brakes are supplied fully bled, fitted to the bike, and ready to go. The photos show the bike with Magura MT7 HC3 brake option. The brake hose is not routed through the steerer tube as standard, this is an additional cost which can be added at the time of purchase.
Please note: the warranty for this bike is void if rotors larger than 185mm are used either front or rear.
Drivetrain
- Cranks: Truvativ Descendant 7K DUB, 175mm, Satin Black
OR Hope Evo Crankset, 175mm,
OR Cane Creek eeWings Crankset, 175mm
- Bashring: Inspired Truvativ Integrated Bashring/Chainring V2
OR Hope Integrated Bashring
OR Cane Creek Integrated Bashring
- Chain: KMC Z1eHX
- Rear Sprocket: Trialtech Sport Splined 16T
- Pedals: Inspired Team V3 Platform
- Bottom Bracket: Truvativ GXP DUB
OR Hope Sealed BB
OR Cane Creek Hellbender 70 BB
Seating
- Saddle: Inspired Tripod, Kevlar, Medium
- Seatpost: Inspired Tripod
- Seat Clamp: Inspired, 31.8mm
Steering
- Headset: FSA, 1-1/8" Integrated Upper, 1.5" Integrated Lower
- Stem: Trialtech Sport, 90mm x 35˚
- Grips: LizardSkins Danny MacAskill Lock-Ons
- Handlebars: Inspired Team 7075 Riser
Geometry:
- Wheelbase: 988mm
- Chainstay length: 362mm
- BB Height: +15mm
- Head Angle: 74°
- Centre of BB shell to centre top of head tube: 680mm
-
Please note that Reach and Stack are measured using new tooling, so numbers will differ slightly to older measurements. Using the old method, Reach and Stack measurements are within 1mm of the previous model bike.
Reach: 452mm
Stack: 515mm
Weight - MT7 Descendant as pictured
- 10.38kg (including pedals)
This bike is supplied with a 6 month warranty covering manufacturing and materials defects. The warranty does not cover mistreatment or poor maintenance. Please ensure all the details on the warranty sheet supplied with the bike are adhered to. Certain circumstances (such as stripped threads or rounded crank arm tapers) only occur due to a lack of correct maintenance and all manufacturers are aware of these situations, so any claims due to incorrect maintenance procedures are much less likely to be successful.
We build this bike to a 100% complete state in our workshop before dispatch to ensure all items are manufactured correctly and nothing is missing, but we do have to remove some parts to ensure there is no damage during transit. You will need some basic tools (usually 4mm, 5mm, 6mm and 8mm allen keys and a 15mm spanner) for final assembly upon arrival. We have a video guide here to help, but please don't hesitate to contact us if you require any further assistance.
Please note that the specification on the bike may occasionally vary slightly from the photos and description. If this happens then the overall effect will be an upgrade and it will not affect the cosmetic appearance of the bike drastically.
In stock
Technical Info
Facebook
Need some help?
Very Impressed
Posted by Aidan
I started riding trials on a dirt jumper for a couple of years and loved it. I wanted to see if an actual trials specific bike would be worth the upgrade, and boy was it! The bike feels like its half the weight of my DJ bike and when I do forward pedal hop lunges on it, I can get into a better position with my body thanks to the frame geometry and longer stem, I can at least go a foot or two longer hops now. I also want to mention I was coming from 26-inch wheels on my dirt jumper and was somewhat sceptical of the 24s that are on the Fourplay. But to be honest I actually prefer the smaller wheels as I feel they are slightly more manoeuvrable, and compact than the 26s. I also did end up getting the I9 Hydra hub upgrade and was super stoked about that. Since inspired builds the wheels from scratch anyway, I think it's cool that they give you that option. Lastly, the Tarty Bikes team was super helpful, and replied to any questions I had via email before, and after I got the bike. They also did a really good job packaging the bike, as it came to me in Canada in perfect condition! Another thing I want to mention was that when I was unboxing the bike I might have accidentally lost or thrown away the front hub end caps for the hydra hub, as I unboxed the biked rather quickly and messily. I showed a picture to Ben from Tarty Bikes as I wasn't sure if something was wrong with the hub, and he identified the issue before things were destroyed. I now have the end caps securely fitted to the bike and everything is running smoothly!
Reply from TartyBikes
Hi Aidan
Thanks for the great review! Good to hear you're enjoying your new bike, the Fourplay is one of Inspired's most popular models, it's easy to see why with how manoeuvrable and versatile they are! Glad you found the end caps, always good practice to check the packaging 100%, sometimes small parts can try and escape!
Ben