Coustellier 8mm HS33 Pad Material

Product code: 14459

Work best with: Medium grind.
As used on complete Coustellier brake pads!

- Proven at the highest level of the sport, Coustellier pad material is now available separately!
- This is the same material as used on complete Coustellier HS33 brake pads.
- The material is supplied as two 8mm deep strips approximately 54mm in length. Each strip is hand cut, and lengths / finish will vary.
- The Coustellier pad material can be glued to your preference of pad backing. We recommend Loctite 406 for fixing to metal or plastic backings. Once the material has been fixed to the backing, it can be sanded for a neat fit, just like regular Coustellier brake pads!

- Make sure to follow the advice below before attempting to fix the Coustellier material to your pad backing:

- The backing must have a flat, even surface free of dirt, damage, and loose material to secure the Coustellier pad material.
- The surface of the Coustellier pad material that will be fixed to the backing must be lightly sanded to ensure good adhesion.
- Once the material is secured to the backing, it must be left for the glue to set fully before sanding for a precise fit.

- Making your own brake pads is done at your own risk. We cannot take responsibility for any type of pad failure, and resulting damage or personal injury as a result of the use of this material in any way. If you're unsure about how to use this material, please don't hesitate to get in touch. We'll be happy to advise you! Recommended Use

Sharp medium grind, dry weather, slightly deeper grind for wet weather.

TartyBikes V4 Chainstay Protector

Product code: 12485

£4.50

100%

£4.50

4 colours available

Browse…

Recently viewed

Shopping basket

My Account