- Replacement 2014 T6 aluminium axle to fit Hope Pro 2 Trials, Pro 2 Evo Trials or Pro 4 Trials hub. These axles will ONLY fit the Trials / SS hub, not a regular Pro 2, Pro 4 or Pro 5 hub.
Various models available:
- 12mm through axle for Skye, Crewkerz and 2020 onwards Hex and Fourplay bikes, HUB1007-3 or HUB1007-3S.
- HUB218 to fit 10mm bolts (fits non-Evo version of the hub, with 15mm diameter at both ends where the end caps fit on).
- HUB236 to fit 10mm bolts (fits Evo version of the hub, with 15mm diameter at the drive side end and 17mm diameter at the non drive side end).
- Pro 4 version (plain 17mm diameter on the drive side, 17mm on the non drive side - 10mm bolt in version HUB1009-50S, 12mm through axle version HUB1009-49S).
- Pro 5 135 x 12mm version (17mm diameter on the non-drive side, 17mm diameter tapering down to 15mm diameter on the drive side). HUB1018-62S
- Ideal to replace any broken or stripped axles.
- Simple fitting with a mallet and a couple of bits of soft wood.
- Bolt-in version is designed for M10 male bolts, so axle is internally threaded.
- Now also available as a 12mm Through Axle model, suitable for use in the Inspired Skye or Fourplay and Hex Team 2020-onwards rear hubs, and as a conversion for any 12mm bolt through frames such as the Crewkerz Jealousy.
- Sold singly.
- Weight: 46g (alloy)
Read more
Hi there, Just to confirm, the 2018 HEX (which is not 12mm bolt, but 10mm axle bolt) that the HUB1009-50S, is the correct axle for a PRO 4 Trials to convert back from 12mm through axle? I want to get this right, please. Thanks, Brett
Posted by Brett Stollery
Reply from TartyBikes
Hi Brett
That is correct! The 10mm bolt in axle for the Hope Pro 4 Trials S/S hub is part number: HUB1009-50S
You also need the correct axle end caps to use with the bolt in axle, which are part numbers HUB472 for the drive side and HUB459N for the disc side. These will give an axle OLD of 135mm. Bolts are also available separately on our site, just search for part number: 543
Ben