TartyBikes : Hope Hose Spares

Reply from TartyBikes on 19/03/2012

Hi Fredrich - Thanks for the information/review!

Reply from TartyBikes on 18/10/2012

Hi Alexandru - It's good to hear your order arrived quickly and safely with you. Thanks for the review!

Reply from TartyBikes on 18/11/2011

Hi Fred - Certainly is! Sorry if the title was a little misleading. Thanks, Mark

Reply from TartyBikes on 02/04/2012

Hi Georg - If you just want to route it through your steerer without adjusting the length, you can often get away with re-using your olive (although a new olive will make life easier!). Similarly, if you were shortening the hose you can theoretically re-use all the fittings if you're able to cut through the hose to get the old hose insert out. Buying the new fittings will definitely make life easier though! If you're re-routing the hose you'd need Item 6, and if you're shortening the hose too you'd need both Item 6 and Item 10. Thanks, Mark

Reply from TartyBikes on 03/12/2012

Hi Chris - Apologies for the slow reply but we wanted to give everything a double check so we don't give you any bad advice! From checking it on a brake here, you'd need to use an entire Hope setup for the connection with your lever. It's not really possible to mix and match Hope and Echo fittings as they're all slightly differently sized to each other. To that end, if you wanted to replace your Echo fittings on your hose, you'd need to use the Hope Hose Spares listed in the Additional Information section under the 'Echo Lever' heading. If you use all of those together with your Echo hose they should fit in fine with your TR lever. Thanks, Mark