• Opening Hours.
    Thu: 9.00am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Heatsink CNC Yellow V-Pads

Product code: 11546


On order

Heatsink CNC Yellow V-Pads

Super high quality CNC backed V-Brake pads from Heatsink.

- Tested and developed with several top riders, the Heatsink range of CNC Yellow pads have been designed and manufactured in Cambridgeshire.
- Featuring Heatsink's yellow pad material, designed to give great bite and hold when used in conjunction with a sharp, medium grind.
- Unique CNC pad backings with high quality steel brake posts give a solid brake feel.
- 8mm of pad material ensures a long-lasting pad.
- Loved by street riders for their aggressive bite.

Recommended Use

Sharp medium grind, dry weather, slightly deeper grind for wet weather.


Due to the very stiff backings, it is imperative that these pads are set up perfectly squarely.

Additional Information

Please note that the use of tar, brake spray or other substances can have adverse effects on the life of brake pads and we are unable to accept responsibility for this.



are theses pads refillable? thanks

Posted by brian on 08/07/2011

Reply from TartyBikes on 08/07/2011

Hi Brian - These pads are re-fillable using the standard Heatsink Refills. Thanks, Mark


hi, will these breaks fit on to a bmx? thanks

Posted by jordan on 19/06/2012

Reply from TartyBikes on 20/06/2012

Hi Jordan - These pads should fit onto a U-Brake as well as a V-Brake, in which case they'll fit onto your BMX. The only thing to note is that you'll need to re-use the washers and nuts from your current brake pads as the Heatsink pads are supplied without any fittings. Thanks, Mark


Hi is it 25 for 1 or 2 (pair) for the Heatsink CNC V-Pads thanks terences

Posted by terence on 10/04/2014

Reply from TartyBikes on 11/04/2014

Hi Terence - purchasing this product will get you two individual pads, enough for one brake. Thanks, Flipp.


how long would these brake pads last roughly? thanks.

Posted by Jack on 06/05/2014

Reply from TartyBikes on 07/05/2014

Hi Jack - thanks for your question. Unfortunately that's a very hard question to answer as it entirely depends on how you ride. If you ride aggressively, most days in the week, and use an aggressive grind on the rim they might only last three or four months. If you ride casually, a couple of times a week and use a smooth rim they could last over a year. Sorry that's a vague answer, but hopefully it will help. Thanks, Flipp.


Hey guys!... Will these fit Avid SD5 V-Brake as supplied with the Inspired flow? Also. Are these pads load (squealing)

Posted by Mark on 25/11/2015

Reply from TartyBikes on 26/11/2015

Hi Mark - These should fit the Flow fine. You'll need to reuse the little spacers that are fitted on the standard pads to get them to work (the Heatsink pads aren't supplied with any). These pads are fairly loud as they're a soft compound. This does means that you'll get improved braking performance from them though. You can slightly reduce the amount of noise by setting the pads up so the front end of the pad makes contact with the rim first, just before the rear (this is called "toeing in" the pads). This reduces the vibration that causes the noise, although it does make the lever feel a little more spongey. Thanks, Mark


Write a review


Based on 3 customer ratings


Great pads lots of power

Posted by Chris on 07/05/2011

Great pads very good when set up. Lots of power for when I am on the back wheel. I really love them, much better than the standard pads I had been using. Cheers, Chris



Posted by Rourke on 19/05/2013

These brake pads are great with a light grind, and don't slip very often. Beware they are loud!

Reply from TartyBikes on 20/05/2013

Hi Peter - These pads certainly are pretty loud! It's good to hear you like the performance from them. Thanks for the review!



Posted by Kieran on 27/05/2014

So good, turns your V brake in to a amazing brake not to mention the noise.

Reply from TartyBikes on 27/05/2014

Hi Kieran - thanks for leaving a review. We're glad to hear you're happy with your purchase! Thanks, Flipp.

People who bought this also bought…

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008





In stock In stock

View options

In stock

In stock

KMC Z610 HX, 3/32"

Product code: 11539





In stock In stock

Add to basket

In stock

In stock

Echo Urban 2013 20"

Product code: 11923

From £59.99 to £89.00

20" Forks

2 colours available

From £59.99 to £89.00

RRP: £89.00

Save up to 33%

2 colours available

From £59.99 to £89.00

RRP: £89.00

Save up to 33%

Check Stock Check Stock

View options

Check Stock

Check Stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough