• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Clean T13 Lever V3

Product code: 12603

£70.83

In stock

Clean T13 Lever V3

  • V3 update features alloy piston, new bleed port & more!
- Revised and updated complete hydraulic rim brake lever designed and tested by World Champion Abel Mustieles!
- Minimal, super lightweight design, manufactured in Spain to ensure the highest quality and tightest tolerances.
- Comfortable 4-finger style lever blade combined with a 13mm piston provides 16% more braking power than standard 14mm pistons.
- New blade profile improves comfort and blade stiffness.
- New for the V3, the T13 lever features a wrap-around split bar clamp, held in place by an offset bolt from the top and bottom. Please note: You will need to remove your grips to first install the wrap-around clamp on your bar. The updated V3 bar clamp helps give better, more even tension and clamping performance.
- Updated alloy piston is an upgrade from the previous generation nylon TPA.
- Twin O ring seal on the piston to keep dirt out and oil in!
- Extra strong spring helps to retract the brake when you get tired at the end of a long section.
- Hard anodised finish throughout for improved durability and looks!
- M5 bleed bolt and stainless steel barbed fitting are positioned right up against the handlebar, as much out of the way as possible. The barbed fittings are also about half the size of standard fittings, further reducing weight.
- Please note that due to the different thread, standard style barbed fittings (including Magura, Stan Titanium and Racing Line) will NOT fit this lever.
- The V3 bleed port is positioned opposite the main hose port, making it easier to access compared to the V2.
- A bushing inside lever blade prevents play from developing and means the lever is very smooth in operation - most levers run the lever blade directly on the pivot bolt.
- Supplied with barbed fitting and bleed bolt with nylon washer as pictured.
- Available in anodised black finish with laser etched graphics only.
- Sold singly, works as both a left and a right hand lever.
- Weight: 73.2g

Additional Information

Please Note: As with all the Hydraulic Rim Brakes we supply, the warranty is only valid when used with mineral oil. This warranty period covers manufacturing and materials defects for 6 months from the date of purchase.

Questions

Carsinn

Hey guys! Would a racing line nano / 13mm aluminum piston fit this brake? Thanks guys!

Posted by Carsinn on 06/04/2015

Reply from TartyBikes on 07/04/2015

Hi Carsinn - thanks for your question. Yes, those pistons would work just fine in these levers. Thanks, Flipp.

Vladyslav

Hi TB, just want to confirm if its ok to bleed this lever with trialtech bracke fluid. Thanks.

Posted by Vladyslav on 22/07/2015

Reply from TartyBikes on 23/07/2015

Hi Vladyslav - yes, this will work absolutely fine. Thanks, Flipp.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Clean T13 Barbed Fitting

Product code: 12600

£4.50

£4.50

£4.50

On order On order

Stock reminder

On order

On order

RockMan Single Wall Front 26"

Product code: 11277

£45.00

26" Front Rims

2 colours available

£45.00

2 colours available

£45.00

On order On order

Stock reminder

On order

On order

Sapim Race 26", Black

Product code: 239

From £28.00 to £30.00

From £28.00 to £30.00

From £28.00 to £30.00

In stock In stock

View options

Notice

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top