• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Magura MT5 Fabio Wibmer Signature Edition (Pair, no rotors or adaptors)

Product code: 13878

$287.65

In stock

Magura MT5 Fabio Wibmer Signature Edition (Pair, no rotors or adaptors)

  • Super powerful brake from Magura!
  • Limited Edition Fabio Wibmer spec and colour.
  • Upgrades over the standard MT5 include HC1 lever blades and Performance pads!
  • Sold as a pair of brakes.

- Brand new for 2020, the Magura MT5 Fabio Wibmer Signature Edition brake set!
- Limited Edition run, meaning you won't see many of these out on a ride!
- Based on the tried-and-tested super powerful MT5 brake, but with some upgrades to suit Fabio's high level of riding.
- Fitted with Magura's upgraded HC1 Lever Blade as standard!
- Performance MT7 brake pads improve performance over the standard pads fitted to the MT5.
- Magura's "Carbotecture" material is again used to construct the brake lever.
- Split bar clamp allows easy fitting and removal, without having to take off your grips.
- Utilises Magura's tried and tested sealing system, designed to work flawlessly with mineral oil.
- Bleeding is quick and easy thanks to their super simple lever bleed port.
- Specially selected hydraulic piston ratios give good mechanical advantage and enhanced braking power.
- Stiffer HC1 lever blade design improves brake feel.
- Smoothed off rear side of brake levers helps to prevent cuts to your fingers gripping the bar when you pull the lever hard.
- Ergonomic lever tip is comfortable to use and helps keep your finger securely in place.
- Four-piston caliper is shared with the Magura MT7, giving incredible amounts of braking power.
- Post mount fitting is ideal for many of the new frames on the market.
- Only available in Black, with unique gold bore caps and Fabio's signature!
- Brakes are supplied with 220cm hose, so can be used for front or rear, and come with all the necessary fittings to shorten the hose to your desired length (for assistance, you can refer to the manual supplied with the brake, or Magura's website).
- Brakes supplied pre-bled with bolts and hose fittings, without rotor or adaptor.
- Sold as a pair of brakes.
- Weight: 275g per brake, with uncut hose

We have made a disc brake guidance and information sheet which will be very useful if you are not experienced with disc brakes (or even if you are!). We strongly recommend having a look over it before fitting your new brake. This can be downloaded here.

Important Information:

To correctly fit the lever to the handlebar, the bolt with the arrows pointing towards it must be gently tightened first until the gap is closed, then the other bolt should be nipped down. Do NOT tighten this bolt right down, normally there will be a gap of around 2-3mm when the lever is tight on the bars. Over-tightening the bolts or not following this procedure is likely to crack the lever clamp and this is not covered under warranty.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

100%

Based on 1 customer rating

Benjamin

Superb modulation and power

Posted by Benjamin

I really like these brakes. Their finish is a perfect match for my Ohlins (another sponsor of Fabio) equipped mountain bike. Using my stock brakes I need to put a second finger up on my front lever for the really hard stops (running 200mm rotors front and rear). Between the performance pads and stiffer caliper, I don't think this will be happening anymore. The pads do have a bit more wiggle room than on Hope brakes, so they're probably less suitable for competition bikes than they would be on a street bike. Update: USE OF MAGURA 4 POTS WITH PERFORMANCE PADS AND 220 MM ROTORS WILL MAKE YOU FEAR FOR YOUR LIFE. This makes me giddy with excitement, and for that I thank you TartyBikes!

Reply from TartyBikes

Hi Benjamin!
It's great to hear you like your new brakes! That pad movement will stop once the pads have bedded in a little more. The individual pad style gives greater pad cooling/heat dissipation, but the trade-off is that slightly longer initial bed in period while the pads settle down. You should find that after a little while they'll give a much more solid feel.
Thanks for the review, and we hope you continue to enjoy your brakes!

People who bought this also bought…

Inspired Truvativ V2 Integrated Bashring

Product code: 13344

£69.00

100%

£69.00

£69.00

On order On order

Stock reminder

On order

On order

TartyBikes V4 Chainstay Protector

Product code: 12485

£4.50

Chainstay Protectors

4 colours available

£4.50

4 colours available

  • New sizing, available in 4 colours!
  • Wide range of compatibility, from the steel Inspired Arcade up to the widest alloy trials frames!
  • Double stitched velcro ensures maximum life!

£4.50

In stock In stock

View options

In stock

In stock

Magura Storm HC

Product code: 13103

£25.00

£25.00

  • Available in 160mm, 180mm or 203mm sizes.
  • Compatible with all the MT range of Magura brakes, plus many others!
  • Includes rotor bolts!

Check Stock

Check Stock

  • © TartyBikes Ltd, 2020
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by tame

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.