• Opening Hours.
    Fri: 9.00am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Echo CNC HS33

Product code: 12017

£20.83

Check Stock

Echo CNC HS33

White
Yellow

Sold out

- Echo's entry into the CNC-backed pad market!
- Unique backings are CNC-machined from high quality aluminium to help improve brake stiffness.
- An O-ring situated inside the backing helps give a secure fit on the cylinder - to make fitting easier, we recommend using a drop of thin oil or lubricant on the O-ring.
- New yellow brake pad material is aimed at use with a ground rim for best performance.
- Also available with the tradition Echo white brake pad material.
- Suitable for use with Magura HS11 and HS33 brakes, as well as the Echo TR Hydraulic Rim Brakes.
- Other brake pad refills can be used, although they will require modification to fit into the Echo pad backing recesses.
- Supplied as a pair.

Recommended Use

Sharp medium grind, dry weather, slightly deeper grind for wet weather.

Important

Due to the very stiff backings, it is imperative that these pads are set up perfectly squarely.

Additional Information

Always ensure that the O-ring is lubricated before fitting the pads, this will allow it to fit over the pin on your brake cylinder more easily.

Supplied as one pair (2 pads) as shown.

Please note that the use of tar, brake spray or other substances can have adverse effects on the life of brake pads and we are unable to accept responsibility for this.

Questions

stavros

Are these pads soft or hard, and do they work better on a grind or on a smooth surface rim? Thanks.

Posted by stavros on 20/08/2013

Reply from TartyBikes on 21/08/2013

Hi Stavros - these pads are relatively hard and work best on a ground rim. Thanks, Flipp.

Stefano

Hi, are these pads suitable for recing line brakes? Do you have any other pads to racomand? Thenks

Posted by Stefano on 22/03/2018

Reply from TartyBikes on 23/03/2018

Hi Stefano - These pads should fit the Racing Line brakes fine, as will all of the pads in our HS33 Brake Pads section. To work out which pads to go for, decide if you're going to use a smooth rim or whether you're going to grind your rim, then look for pads that suit (each pad mentions in the description). For example, if you run a smooth rim the TR1AL HS33 pads or Heatsink Blues would work well. If you have a ground rim, the Heatsink Yellow or RockMan 2018 pads would be a good choice. You can also use this style of metal backed brake pad if you want a slightly stiffer brake feel, but they do unfortunately cost a little more. Thanks, Mark

Reviews

Write a review

Not yet rated

People who bought this also bought…

KMC K910, 3/16"

Product code: 12836

£14.00

£14.00

£14.00

In stock In stock

Add to basket

In stock

In stock

Monty Long-Sleeve Jersey

Product code: 12586

From £14.99 to £30.00

From £14.99 to £30.00

RRP: £30.00

Save up to 50%

From £14.99 to £30.00

RRP: £30.00

Save up to 50%

Check Stock Check Stock

View options

Check Stock

Check Stock

#Hashtagg Carbon 26" Forks (HS33)

Product code: 12956

£379.00

£379.00

£379.00

On order On order

Stock reminder

On order

On order

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top