• Opening Hours.
    Fri: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

TartyBikes Star Nut

Product code: 10541

$3.29

Check Stock

TartyBikes Star Nut

18mm
21mm
22.7mm
23.5mm
26mm
29mm

Sold out

- Replacement star fangled nut for use inside fork steerer tubes to allow pre-load of headset bearings.
- Standard M6 x 1.0 thread.
- Available in various sizes: Dimension listed is the outer diameter of the star nut itself, before fitment.
- To check which size you need, measure the internal diameter of your steerer and choose a star nut that's between 1mm and 3mm larger than that size.
- 29mm generally fit 1 1/8" steel steerers, 26mm 1 1/8" standard alloy steerers, 21mm / 22.7mm are for use in Echo 1 1/8" alloy steerers and 18mm ideal for Inspired Fourplay or Team/Trialtech Sport forks - but please always measure the internal diameter of your fork to be sure!
- Sold singly.

Please note that star nuts are designed to be a tight fit so they don't pull back out when you tighten your headset. We strongly recommend using a star nut setting tool for fitting, or alternatively you can screw a bolt into the thread and then carefully tap the bolt to install. Damage to the star nut during fitting is not covered under warranty as these do not 'just fall apart'! Similarly, the warranty does not cover instances where the headset top cap bolt has been over-tightened.

If you are buying forks and a star nut and would like us to fit it for you, add a Star Nut Fitting workshop item to your basket.

Additional Information

Photos are for illustration purposes, exact design may vary.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

100%

Based on 2 customer ratings

ashley

very helpful

Posted by ashley

So much less hassle than cutting down a big one!

Reply from TartyBikes

Hi Ash - They're certainly a handy addition! Thanks for the review.

Callum

Nifty replacement

Posted by Callum

Again just an odd little sod that you need. :D Thanks guys!!

Reply from TartyBikes

Hi Callum - It is handy having the sizes needed for trials forks - they can sometimes be pretty tricky to get hold of from regular shops due to them being an odd size. Thanks for the review!

People who bought this also bought…

Extention Splined 116 Rear Disc

Product code: 14208

£55.00

£55.00

  • Direct replacement rear hub for Extention Rise 20 bikes!
  • Only compatible with Extention 12T Splined Sprockets.

£55.00

In stock In stock

Add to basket

In stock

In stock

Jitsie Reverz Rear 26" Tyre

Product code: 13290

£45.00

£45.00

£45.00

In stock In stock

Add to basket

In stock

In stock

Crewkerz WAW Carbon Tensioner

Product code: 14281

£50.00

£50.00

  • As fitted to 2024 Crewkerz Jealousy bikes!
  • Super lightweight carbon construction, weighing just 29 grams!

£50.00

Out of stock Out of stock

Stock reminder

Out of stock

Out of stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy