- New for 2016 from Hope, the updated Pro 4 Front hub!
- CNC machined from billet 2014 aluminium.
- New design sees the introduction of larger diameter flanges to help provide a stronger wheel build.
- Hollow 9mm aluminium axle for use with quick release skewers (
axle conversion end caps also available to convert to 15mm and 20mm through axles, or we can supply any version / fitment of the hub at no extra charge, please contact us for details or request the fitment in the notes field at checkout).
- 100mm spacing, to fit all modern front forks.
- Fully sealed large cartridge bearings are updated for 2011 to Hope's new, custom-made longer lasting stainless steel bearings.
- 6bolt IS (International Standard) bolt pattern.
- Good warranty back-up covering all disciplines of mountain biking.
- Available in 32h drilling only (24, 28 and 36h versions available as a special order - contact us for more information!).
- Available in a range of vibrant colours.
- New laser etched graphics match the rear hub.
- Weight: 190.2g.
Hub Dimensions
Disc Side:
- Flange Diameter: 57mm
- Centre to Flange: 20mm
Non Disc Side:
- Flange Diameter: 57mm
- Centre to Flange: 34mm
Hello Tartybikes! Is there an adapter for the BOLT IN System? I just found it for the rear hub. Thanks Dominik
Posted by Dominik on 10/10/2016
Reply from TartyBikes on 10/10/2016
Hi Dominik - There is no bolt in version for this hub, sorry. Thanks, Mark
Hi, So recently I found the spank spoon 28 24" (Red) rims on spank.com I was wondering. Would they be able to stand street trials? And would they pair with the front and rear pro 4 hub, hope float rotor and magura mt7? Many thanks, Morgan
Posted by Morgan on 29/10/2016
Reply from TartyBikes on 31/10/2016
Hi Morgan - The rims themselves should be quite strong, but the problem would be the width. As they are so narrow, unless you ran extremely high pressures you would find you had much more tyre roll than with a wider rim, and also a much greater chance of getting pinch flats. Your tyre profile would also be a little more rounded than it would be on a wider rim. In terms of compatibility, they should be fine with the other parts you're using. Thanks, Mark
Hello, fits the Hope Pro 4 front and rear hub to the Inspired Flow fork and frame? Thanks!
Posted by Simon on 10/10/2017
Reply from TartyBikes on 10/10/2017
Hi Simon - They would fit fine, as long as you get a Quick Release for the front hub. You'll also need a sprocket and a cassette lockring for the rear hub. Thanks, Mark
Hello 2017 Inspired arcade pro trial tech Is it possible to use the 15 mm adapter attached to the front hub shaft as it is?
Posted by hiroyuki on 22/11/2017
Reply from TartyBikes on 22/11/2017
Hi Hiroyuki - The adaptors for the Trialtech hub won't work with the Hope hub, sorry. You would need to use the Hope 15mm Axle Adaptors (Product code: 11295). Thanks, Mark
what do you mean by: "we can supply any version / fitment of the hub at no extra charge" I'm planning to buy and put it in my Inspired Fourplay. And I think I need the 15mm axle adaptors. Is it for free or I need to buy it separately? Thanks
Posted by mark on 28/12/2017
Reply from TartyBikes on 29/12/2017
Hi Mark - By this, we mean we can supply the hub with your choice of end cap if you mention it in the Notes field for your order. For example, for your Fourplay you'd need to request one with 15mm Axle Adaptors. Thanks, Mark
Is this hub compatable with czar ion bike?
Posted by Dima on 14/02/2018
Reply from TartyBikes on 15/02/2018
Hi Dima - This hub is compatible with the Czar Ion forks, but you would also need to get a Quick Release Skewer to go with it. You will also need new spokes as the hub dimensions are different on the Pro 4 to the standard hub supplied on the bike. Thanks, Mark