• Opening Hours.
    Fri: 9.00am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Hope Pro 2 Evo

Product code: 11649

From £33.32 to £54.17RRP: £54.17(Save up to 38%)

Check Stock

Hope Pro 2 Evo

28h
Black
Purple

Sold out

The popular and reliable Hope Pro 2 Evo front disc hub!

- CNC machined from billet 2014 aluminium.
- Hollow 10mm aluminium axle for use with quick release skewers only (20mm bolt-thru version also available).
- 100mm spacing, to fit all modern front forks.
- Fully sealed large cartridge bearings are updated for 2011 to Hope's new, custom-made longer lasting stainless steel bearings.
- 6bolt IS (International Standard) bolt pattern.
- Good warranty back-up covering all disciplines of mountain biking.
- Available in 28, 32 or 36h drilling.
- Available in a range of vibrant colours.
- Any options no longer shown are discontinued - this item has been replaced by the Pro4.
- Weight: 186g.

Hub Dimensions

Disc Side:
- Flange Diameter: 55mm
- Centre to Flange: 20mm

Non Disc Side:
- Flange Diameter: 55mm
- Centre to Flange: 34mm

Additional Information

To attach this hub to your forks, you will need a Quick Release skewer - you've most likely got one from your old wheel.

Questions

Mitch

Does this hub also work as a rear hub, and will it fit the rear of a  Echo Lite 2011 frame if I use the Hope CNC Steel Skewer '09. Thanx

Posted by Mitch on 12/03/2012

Reply from TartyBikes on 12/03/2012

Hi Mitch - Unfortunately it's not possible to use this as a rear hub, sorry. Thanks, Mark

Jamie

will the hub fit with the inspired element 26" standard front rim and spokes? thanks

Posted by Jamie on 28/11/2013

Reply from TartyBikes on 29/11/2013

Hi Jamie - thanks for your question. You can happily use the standard rim, though you would need new spokes as the hub has different dimensions to the one the bike comes with. Hope that helps. Thanks, Flipp.

luke

i recently brought the new fourplay and was wondering if this hub would fit on it as the trial tec hubs that are on it now are female hubs

Posted by luke on 15/08/2014

Reply from TartyBikes on 15/08/2014

Hi Luke - yes, these hubs would fit in your fork perfectly used with a skewer. Thanks, Flipp.

Andrew

Is this version for 5mm or 9mm skewers?

Posted by Andrew on 05/12/2016

Reply from TartyBikes on 05/12/2016

Hi Andrew - The outer diameter of the end caps where they sit in the dropouts is 9mm. Any of the front QR skewers from our Quick Releases section would fit perfectly to give you an idea: http://www.tartybikes.co.uk/quick_releases/c24.html Thanks, Mark

Tristan Jackson

hi, does this hub come with a quick release skewer or would i need to buy one seperatly? thanks

Posted by Tristan Jackson on 13/04/2014

Reply from TartyBikes on 14/04/2014

Hi - You need to buy one separately. Thanks.

Jordan

Hi, i have recently brought an Inspired Skye frame kit (frame, fork, axles, but no hubs) and im wondering if i will need axle adaptors to use this on the front and anything else i will need to complete this to allow it to work. im probably getting a 32h if that helps help would be greatly appreciated, thanks Jordan :)

Posted by Jordan on 15/03/2014

Reply from TartyBikes on 17/03/2014

Hi Jordan - thanks for your question. You would simply require changing the end caps to the 20mm version (http://www.tartybikes.co.uk/hub_spares/hope_pro_2_axle_adapters_front_hub/c22p11295.html). Thanks, Flipp.

Sabrine Sehili

Hi, I have 2 questions: Can I use your product with my Ozonys Iron frame, Inspired Integrated Bashring (22T) and Trialtech Sport Splined (16T)? Does it mind if I buy the "Black (20mm bolt-thru)", or simply click the "black" button? Thanks!

Posted by Sabrine Sehili on 02/02/2016

Reply from TartyBikes on 03/02/2016

Hi Sabrine - This should fit fine in your Ozonys forks, although you would need the correct end caps. You would need to purchase the standard Black (or colour of your choice) hub, and also purchase some "15mm Through-Axle" Hope Pro 2 / 4 Front Axle Adaptors (if you search for quick find code 011295 you should find them) to work with your Iron forks' through axle system. Thanks, Mark

Reviews

Write a review

Not yet rated

People who bought this also bought…

V!Z Alloy Nipples (Pack of 36)

Product code: 10216

From £5.99 to £8.00

100%

Spoke Nipples

6 colours available

From £5.99 to £8.00

RRP: £8.00

Save up to 25%

6 colours available

From £5.99 to £8.00

RRP: £8.00

Save up to 25%

Check Stock Check Stock

View options

Check Stock

Check Stock

Trialtech Sport 135mm Rear Disc

Product code: 12829

£45.00

£45.00

£45.00

In stock In stock

Add to basket

In stock

In stock

Jitsie Rim Tape

Product code: 13208

£4.00

£4.00

£4.00

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top